I don't know what's wrong.

[MRJEON]

m552 s1
ok
WiFi reported error: no known networks found
WiFi module is idle

m587
Remembered networks:
test IP=0.0.0.0 GW=0.0.0.0 NM=0.0.0.0
ok

m122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.1.1 running on Duet WiFi 1.02 or later
Board ID: 08DLM-996RU-N85S4-7JTD8-3S46R-9VBVP
Used output buffers: 1 of 24 (11 max)
=== RTOS ===
Static ram: 27980
Dynamic ram: 93236 of which 20 recycled
Exception stack ram used: 256
Never used ram: 9580
Tasks: NETWORK(ready,844) HEAT(blocked,1456) MAIN(running,1720) IDLE(ready,80)
Owned mutexes:
=== Platform ===
Last reset 00:05:11 ago, cause: software
Last software reset time unknown, reason: Watchdog timeout, spinning module GCodes, available RAM 11680 bytes (slot 2)
Software reset code 0x00a3 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0043380f BFAR 0xe000ed38 SP 0x200049d4 Task MAIN
Stack: 004486cf 0042a316 21000000 3f800000 00000000 00000000 00000000 3331bb4c 40000000 3f317200 b5ddea0e
Error status: 0
MCU temperature: min 35.3, current 35.6, max 35.9
Supply voltage: min 1.7, current 1.7, max 1.8, under voltage events: 0, over voltage events: 0, power good: no
Driver 0: ok, SG min/max not available
Driver 1: ok, SG min/max not available
Driver 2: ok, SG min/max not available
Driver 3: ok, SG min/max not available
Driver 4: ok, SG min/max not available
Date/time: 1970-01-01 00:00:00
Cache data hit count 611435937
Slowest loop: 99.89ms; fastest: 0.09ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 3.1ms, write time 0.0ms, max retries 0
=== Move ===
Hiccups: 0(0), FreeDm: 169, MinFreeDm: 169, MaxWait: 0ms
Bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0 CDDA state: -1
=== AuxDDARing ===
Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0 CDDA state: -1
=== Heat ===
Bed heaters = -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is ready with "m122" in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 1.31ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
HTTP sessions: 0 of 8

• WiFi -
  Network state is active
  WiFi module is idle
  Failed messages: pending 0, notready 0, noresp 0
  WiFi firmware version 1.23
  WiFi MAC address ec:fa:bc:5b:45:b7
  WiFi Vcc 3.36, reset reason Unknown
  WiFi flash size 4194304, free heap 30176
  Socket states: 0 0 0 0 0 0 0 0
  ok
  ..

what's wrong...

[dc42]

Please use your other thread to continue this discussion.