Solved Delta: temporarily lift work envelope restriction
-
I have a Delta printer driven using a Duet Wifi. I would like to add a "waste bucket" next to the printing surface with a silicone wiper to clean the nozzle. I have some space left there, but the firmware will not let the nozzle leave the circular work area. Is there a way to (temporarily) disable this restriction?
-
set the R value of M665 to a higher value and set it back afterwards. Maybe B as well.
another solution would be to mount the wiper on a servo and move the wiper in using the server.
-
@vwegert the B value controllable the work area radius. It acts as a safety but otherwise doesn't affect anything but how far out the platform can move.
I wouldn't adjust the R value as that affects the G32 calibration.
-
M564 S0 should do what you want.
-
@dc42 said in Delta: temporarily lift work envelope restriction:
M564 S0 should do what you want.
It does, thank you very much