Problem with print
-
I am having a problem , after printing for 40 minutes it appears the y axis is skipping or something. I can print multiple towers much higher than this without a problem. Any ideas? (of course you guys have ideas! That is why I moved to the DuetWifi from Replicape) -
Your image link doesn't work for me. Please check it.
-
-
Most likely the nozzle hit a blob and the Y axis skipped steps. Here are some things that may help:
- Increase Y motor current, if it isn't already close to the rated motor current
- Reduce Y travel speed
- Reduce acceleration
-
As David said. The other possibility, if you are printing on a glass clipped to the bed, is that the glass shifted when the nozzle hit the blob. I used to get that with my old Mendel.