G31 offset RRF 3.01RC10

arhi

4/28/2020, 11:53:15 PM 	G31
Z probe 0: current reading 781, threshold 788, trigger height -0.050, offsets X0.0 Y0.0
4/28/2020, 11:53:38 PM 	G31 X0 Y0 Z-0.05 P780
4/28/2020, 11:53:43 PM 	G31
Z probe 0: current reading 781, threshold 780, trigger height -0.050, offsets X0.0 Y0.0

G31 is not returning Z offset ?!

Phaedrux

Try G31 P9 (or whatever probe type you're using)

arhi

@Phaedrux said in G31 offset RRF 3.01RC10:

Try G31 P9 (or whatever probe type you're using)

For G31 P is the trashold setting doing G31 P9 will just set my trashold to 9 (using probe type 1 - analog M558 P1 C"zprobe.in" R2 H5 F1200 T3000 A3 S0.03 K0)

gtj0

@arhi "K" is the parameter to G31 to select the probe number in RRF3.

Phaedrux

Bah, sorry, yes K. Not sure if that's now working.

gtj0

@arhi Looking at your output and my test, Z offset is reported as Trigger Height.

arhi

@Phaedrux K0 does the same as no K .. same probe

@gtj0 hahahahah I need sleep, thanks mate that's it

dc42

Correct, the "Z offset" is the negation of the trigger height.