Time and filamen used write on SD
-
Hi David
It would be possible to save the data / statistics of the end of the Gode just finished in the SD before it goes off, not being on the computer. Also only the time / filament used. So you know the time / material used the next day when I get back to work -
UP this ! Thanks
-
This will be part of Logging, which is at or near the top of the firmware wishlist now. You can already see the filament required (according to the slicer) in the GCode Files list.
-
This will be part of Logging, which is at or near the top of the firmware wishlist now. You can already see the filament required (according to the slicer) in the GCode Files list.
Thanks David