Help to configure order

dc42

1. Yes. You should use 24V power with 0.9deg motors, not 12V.

2. Yes

3. A motor with low inductance. The higher the rated current, the lower the inductance will be, so look for a motor with between 2.0A and 2.4A rated current per phase. For example, 17HM19-2004S. Longer motors will have higher inductance.

See also https://duet3d.com/wiki/Choosing_stepper_motors.

4. Our US distributor is Filastruder.

njjn2020

thank you very much for detailed responce.

i can not find on the site

Mini differential IR height sensor
PanelDue without screen

please advise how to add those items to the cart.

have a great evening!

elmoret

If you mean the Filastruder site:

https://www.filastruder.com/products/mini-differential-ir-height-sensor
https://www.filastruder.com/collections/electronics/products/paneldue

njjn2020

and what for the UK site?
i decided to buy directly from you. thanks!

dc42

You can order those items directly from my escher3d.com web site. But if you are in the US, you'll get them faster if you order them from Filastruder.

njjn2020

well, i have decided that i will ship my order to russia from the uk. it will be faster and cheaper.

is there a way to put
1 duoWiFi (or Ethernet if availeble)
2 pannel duo without screen
3 IR probe

to one order and single shipment (instead of ordering in 3 different places). thank you!

T3P3Tony

I am sorting out the option to order a DanelDuet w/o screen now on the website, I will write again once its done.

We are currently out of stock of IR probes but I am hopieng we will have some more in stock soon.

njjn2020

ok, waiting for the integration result and IR probe availability

njjn2020

duet3d site login function does not work.
"The page you requested cannot be found."
link - https://duet3d.com/%3C/?php%20echo%20$login;%20?%3E

T3P3Tony

Will look into this now

adavidm

Can you get to it from here:

https://duet3d.com/index.php?route=account/login

?

It looks like a problem with escaping php in the website code.

njjn2020

with new link i have created new account

but was unable logon with account i use on forum. are those the same accounts?

njjn2020

"my account" in the right top corner does not work either.
link is defective (see below)

https://duet3d.com/https://duet3d.com/index.php?route=account/account

njjn2020

any luck with duet board for screen (without screen)?

njjn2020

by the way, is it possible to setup DuetWiFi without screen ?

dc42

Yes, you can setup Duet WiFi using a USB connection to a PC.

T3P3Tony

It should be fixed, please check

T3P3Tony

Also the product page for the PanelDue has been updated. IR probes will be back in stock soon

T3P3Tony

IR probes are now back in stock

njjn2020

please fix site authentication issue.

ID from forum does not work for shopping (" Warning: The E-Mail Address was not found in our records, please try again!")
i have created different ID for shopping
forgot new password and used "reset password" form
response: " An email with a confirmation link has been sent your email address."
got link in the email and created new password
response: " Password succesfully updated "
used my email (from newly created account) and new password to login - FAILED
response: " Warning: No match for E-Mail Address and/or Password."

in fact, i tried changing password 3 times. all attempts failed.