Help to configure order
-
ok, waiting for the integration result and IR probe availability
-
duet3d site login function does not work.
"The page you requested cannot be found."
link - https://duet3d.com/%3C/?php%20echo%20$login;%20?%3E -
Will look into this now
-
Can you get to it from here:
https://duet3d.com/index.php?route=account/login
?
It looks like a problem with escaping php in the website code.
-
with new link i have created new account
but was unable logon with account i use on forum. are those the same accounts?
-
"my account" in the right top corner does not work either.
link is defective (see below)https://duet3d.com/https://duet3d.com/index.php?route=account/account
-
any luck with duet board for screen (without screen)?
-
by the way, is it possible to setup DuetWiFi without screen ?
-
Yes, you can setup Duet WiFi using a USB connection to a PC.
-
It should be fixed, please check
-
Also the product page for the PanelDue has been updated. IR probes will be back in stock soon
-
IR probes are now back in stock
-
please fix site authentication issue.
-
ID from forum does not work for shopping (" Warning: The E-Mail Address was not found in our records, please try again!")
-
i have created different ID for shopping
-
forgot new password and used "reset password" form
response: " An email with a confirmation link has been sent your email address." -
got link in the email and created new password
response: " Password succesfully updated " -
used my email (from newly created account) and new password to login - FAILED
response: " Warning: No match for E-Mail Address and/or Password."
in fact, i tried changing password 3 times. all attempts failed.
-
-
meanwhile some tech questions (was not able to find on the site)
-
are all fans output for 5 volt ?
-
there are two "always ON fans". are they also 5v? do they support PWM or other type of speed control?
-
accepting 0.9 deg motors means 24v power supply.
are there 12v outputs on the board (i need it for LED light)?
thank you!
-
-
1. There is a jumper that allows you to set the fan voltage supply to either 5V or VIN. The jumper affects the voltage supplied to all fan outputs.
2. The always-on fan outputs do not support PWM.
3. There is no 12V output on the Duet. There is on the DueX expansion boards.
-
thanks for answers.
please help me to fix login issue for shopping.
-
Hi i have emailed you back.
-
placed an order. thank you from fantastic support!
