Solved Print stops always at the same Z hight
-
Hi,
Im running the DUET Maestro and found an interessting "feature". My printer always stops at around the same Z hight.
https://ibb.co/mNhYGnr
https://ibb.co/VwdSCnCanybody ever had the same "feature"? Or knows a hint?
-
A bit more detail would help.
Does the firmware still respond to commands?
What firmware version?
When it's stopped, can you send M122 to get a diagnostic read out?
Has it always done this, or just recently?
Is it every print, or just sometimes?
Has anything else changed recently?
Have you done a visual inspection of the printer to see if anything appears amiss? -
@simplesimson said in Print stops always at the same Z hight:
Quelqu'un a-t-il déjà eu la même "fonctionnalité"? Ou sait un indice?
A track maybe ... If you're using Simplify3D can a print height be set to stop at a certain height? See in advanced settings.
-
I'm guessing with that chamber heater error message he's using Cura for slicing.
Is this happening just with this print, or all prints?
Ian
-
Hey, sorry have been in vacation. Using Marlin yes.
Firmware and printer still responds.
Latest Firmware.
Will do m122 at next try.
Has it always done this, or just recently? new printer :;) so always and just recently
Is it every print, or just sometimes? Third print - it always appears with large prints.
Has anything else changed recently? Everything and nothing - as said new printer.
Have you done a visual inspection of the printer to see if anything appears amiss? Its in its form of its live
I ll give it another shot. and do m122
EDIT:
and ill change my µstepping to 16 according to this https://forum.duet3d.com/topic/4862/duet-wifi-printer-stalls-stops-no-errors/12
-
I had the same problem. However, it turned out that I had a pause in layer height set in my slicer for post processing a filament change. "Cura 4.X"
-
Problem solved. I had to reduce the microstepping to 16. Works just fine now.
