Webcam setup but not showing in D2W

dc42

If you enter http://10.0.1.21 into your browser address bar, do you get an image from the webcam?

BearcatTD

@dc42

I do!

BearcatTD

@bearcattd

This is what I have:

https://forum.duet3d.com/topic/10067/cheap-wifi-webcam-esp32-ov2640-camera

dc42

I'm not an expert on this, but have you tried checking "Do not append extra http qualifier"?

Synapsis

Have to take the card out but its late, but I would have what is default seeing I never controlled or changhed anything.
My camera needs to have the user name and password when I connect fron the D2W, does your camera ask for a user and password?

BearcatTD

No U or P. it's really simple. The thing is, if I just open up the IP in a browser window it works like a charm!

BearcatTD

@dc42
Not that I can tell...

dc42

@bearcattd said in Webcam setup but not showing in D2W:

@dc42
Not that I can tell...

What I meant is, there is a checkbox in DWC webcam setup that you can either check or leave unchecked. Some cameras need it checked (i.e. enabled), some need it un-checked.

CCS86

I'm bumping this thread because I am having the same issue (DWC 2.0.7)

The camera HTTP link is well formed, and I have tried all combinations of the "do not append..." and "embed webcam..." sliders. No image loads.

However, if I right-click that broken image icon and choose 'view image in new tab', boom, there is my image. Seems like an issue with DWC.

@dc42

Phaedrux

@CCS86 What is the webcam? What format is it outputting? What exactly are your DWC options?

CCS86

@Phaedrux said in Webcam setup but not showing in D2W:

@CCS86 What is the webcam? What format is it outputting? What exactly are your DWC options?

It's an Amcrest 1P2M-841B and the secondary stream should be in JPG / MJPG format.

Here is the DWC webcam configuration page: