Connect pinda probe to Duet Maestro?
-
Hey there,
I have a question. I would like to attach a 5v pinda probe to my duet maestro.
I have rebuild my prusa mk2s and have now several pinda probes collecting dust.So i figured why not use it on my Anycubic Linear Plus. That printer is fitted with a Duet Maestro.
Any tips would be very appreciated.
-
the thermistor is not supported at the moment.
so just leave that off and connect the probe like a normal probe with the 3 remaining wires. -
I have pinda v1 probes so they don't have a thermistor.
-
then its like a normal NPN
see
https://duet3d.dozuki.com/Wiki/Connecting_a_Z_probe -
The thermistor is supported in RRF 3 but not in 2.x.
-
@caveman said in Connect pinda probe to Duet Maestro?:
So i figured why not use it on my Anycubic Linear Plus.
a delta really wants the probe to be the nozzle. i tried a inductive probe on mine but could not get good results.