Solved RRF Tool Not creating accurate config.g?? WassuP?
-
Greeting and Salutations,
Tried the RRF Online configurator and tried to set a static IP addy on my Duet Ethernet (See attached Pic). After Upload the Board came back up with a different addy than what I assigned. Looked at my config.g and could not find a M552 with any ip addy? Weird Huh? I just edited my config file but now I'm starting to wonder what else I asked for that I'm not getting? The struggle is real yo!!
-
I'm sorry, I can't reproduce that. This is the start of the config.g file that it generated, using those settings:
; Configuration file for Duet WiFi (firmware version 1.21) ; executed by the firmware on start-up ; ; generated by RepRapFirmware Configuration Tool v2 on Tue Jan 08 2019 15:13:28 GMT+0000 (Greenwich Mean Time) ; General preferences G90 ; Send absolute coordinates... M83 ; ...but relative extruder moves M665 R105.6 L215 B85 H250 ; Set delta radius, diagonal rod length, printable radius and homed height M666 X0 Y0 Z0 ; Put your endstop adjustments here, or let auto calibration find them ; Network M550 P"My Printer" ; Set machine name M552 P192.168.0.230 S1 ; Enable network and set IP address M553 P255.255.255.0 ; Set netmask M554 P192.168.0.1 ; Set gateway M586 P0 S1 ; Enable HTTP M586 P1 S0 ; Disable FTP M586 P2 S0 ; Disable Telnet
-
Thank you for looking at this. I've tried multiple times to create new firmware files but I still do not get correct IP address settings. I can't imagine why this is the case? Maybe I need to clear the cache on my browser??? Weirdness.
-
Please clear your browser cache and try again. Assuming it still doesn't generate the correct file, post the config.json and the config.g files that it generated.
-
That worked DC! Thank you Sir!!!