G31 says always 0
-
Hi,
why does my G31 says always 0.
Should it not report the status or values?I can do G31 it comes "0"
I can do G31 Z-0.1
then again G31
and it comes 0.Is it right?
-
That's weird. On firmware 2.01 When I send G31 to the console I only get 0 back as well.
What firmware are you using?
-
Firmwarename: RepRapFirmware for Duet 2 WiFi/Ethernet
Firmware Elektronik: Duet WiFi 1.02 or later
Firmware Version: 1.21 (2018-03-21)
WiFi Server Version: 1.21RC4(08b3)
Web Interface Version: 1.21-RC4 -
For historical reasons, G31 with no parameters reports the Z probe reading, rather than reporting the G31 settings. You can send G31 T# where # is the Z probe type number (as in the M558 P parameter) to read back the G31 settings.