Don't see any heaters controls
-
As stated above. I don't see any controls of the heaters in the web interface. I can't see in tools or extras.
My config file:
My connections:
What I "see" in the web control
-
@qlqlo you don't have any tools defined with M563. Look on the "extras" tab
-
@qlqlo to be able to control a heater, you need to configure it as a bed heater or a chamber heater or declare a tool that uses it. As you have a heater called Nozzle I presume this is an extrusion device, so use M563 to declare a tool that uses that heater and the associated extruder drive.
-
