Duet 3 mini 2 wire fan on OUT 3?
-
Installing a Duet 3 Mini in an Makergear M2. Did this a year or so ago with the Duet2.
I have 3 24v fans, Extruder housing, Parts and Main board.
I have the Extruder fan in out5 and the parts in out6 I need a place for the board fan, can I use OUt3 and just hook up ground and v_outLC1 to run a 2 wire fan?
I did a search on 2 wire fan and did not see anything helpful
Thanks in advance
Doug -
@airscapes see the wiring diagram for how to connect a 2-wire fan to a 4-wire OUT port. You use the OUT- pin (negative wire) and VOUTLC (positive wire) pin.
-
-
@droftarts & @dc42 Thanks guys! I looked at that several time but it was a long day.. Makes more sense now! I am sure I will have more questions as I move into the configure stage, but will try and find the answers before I ask!
Have a great week -
This post is deleted!
