3.5.0rc-1 corexy problem
-
Hi,
I've just upgraded from 3.4.6 to 3.5.0rc-1 on my corexy. I've change M667 S1 to M669 S1 in config.g but the machine won't home.
Homing x only one stepper moves, and when homing y only the opposite stepper moves. This naturally causes the carriage to move diagonally and crash.
Could someone please point me in the right direction.
Many thanks
-
@Paddy said in 3.5.0rc-1 corexy problem:
I've change M667 S1 to M669 S1 in config.g
Unless there is an issue with the beta firmware I am unaware of, you need to update that S to K:
M669 K1 -
From the documentation quote...............
"M667: Select CoreXY or related mode
This command is deprecated from RRF 2.03, and removed from RRF 3.5 and later. Use M669 instead."
-
If you're still having issues after that please post your full config.g and homing files as well as the results of sending M122 and M98 P"config.g"
-
@oozeBot You are quite correct. I did look up the gcode dictionary but was too busy looking at the number to notice the letter had changed.
Many thanks!!!!
-
undefined dc42 marked this topic as a question
-
undefined dc42 has marked this topic as solved
