Motor Current
-
Hi David Dc42
Why on DWC the value Motor Current is 0 mA …is bug ?
My Config on 1.9.3 /1.20 beta 10 Duet Ethernet
M906 X1200 Y1200 Z1200 E1500 I30 ; Set motor currents (mA) and motor idle factor in per cent
Thanks -
It could mean that config.g from your SD card is not being read at startup, or that something is causing processing of config.g to end prematurely.
-
It does the same thing on my duet with beta 8. Everything works fine. Just noticed this last night.
-
On DWC is 0mA….but on line command M906 is ok ...
why ?
Thanks -
Mine is the same - looks like a glitch in the machine properties tab of DWC. Never looked at it before so it might have been there for ever. M906 with no parameters is the reliable indicator - ignore the values shown in the machine properties tab of DWC. I guess this is one for Chris Ham, not David.
-
Mine is the same - looks like a glitch in the machine properties tab of DWC. Never looked at it before so it might have been there for ever. M906 with no parameters is the reliable indicator - ignore the values shown in the machine properties tab of DWC. I guess this is one for Chris Ham, not David.
Ok Thanks for the moment ….But on 1.9 FW is perfect on DWC...i reed 1200 mA
-
Just for comparison, it seems to be a recent bug. It's fine on mine.
Firmware Name: RepRapFirmware for Duet WiFi
Firmware Electronics: Duet WiFi 1.0
Firmware Version: 1.20beta1 (2017-10-02)
WiFi Server Version: 1.20alpha1
Web Interface Version: 1.19.3
