3.5 beta3 M291 S = 1 error if message box closed

[mikeabuilder]

I'm playing with M291, writing a lot of test messages to learn and test.

This macro throws an M292 error if I close the message box using DWC before the T delay times out. The error does not stop the macro from continuing to execute.

m291 s1 t5 P" Message 1: S=1, T=5. 10 second delay before the next message." R"S1 Testing (Close button)"
g4 s10

[Phaedrux]

firmware version?

[mikeabuilder]

@Phaedrux - sorry, that was sloppy of me.

HW MB6HC
RRF 3.5.0 beta 3
DWC - 3.5.0 beta 2

Also, I tested this with and without the G4 command and it passes without that command.

[Phaedrux]

Maybe update your DWC

https://github.com/Duet3D/DuetWebControl/releases/download/v3.5.0-beta.3/DuetWebControl-SD.zip

[mikeabuilder]

Same behavior with DWC 3.5.0 beta.3

[dc42]

@mikeabuilder thanks, I've logged this as a potential bug to be investigated before the next beta.

[dc42]

This post is deleted!