Ender 3 config tool questions
-
I realize that the error I was having was due to the new files from config tool conflicting with old software settings on the board. I'm again running through the config tool options, hopefully I selected the correction options.
- IO Mapping - I put Heater 3 for PWM Control Channel (BLTouch only) since I'm crtouch
- Endstops - was defaulted to sensorless, I switched x,y to switch and z to z-probe trigger at .6 (btw all lowend for location)
- Heater default - bangbang
- Fan0 - NO thermostatic - controls hotend
Fan1- Yes thermostatic- controls cool parts / Heat monitors H0 45c
Most of the other options I got sorted out.
-
@Flynbrd which Duet do you have?
-
@dc42 duet 2 wifi
Swiss direct drive + hotend
Crtouch
Non ender touch screen.