M906 Motor current idle factor per axis
-
@dc42 - would it be possible to modify the firmware to set the idle factor per axis? As you saw with our printers, the z-axis is belt driven and requires a high idle percentage to remain stationary where the other axes do not. Thanks
edit great to meet you, btw!
-
M906 line for each axis with I value is what I do
-
@tecno I just re-tested to make sure it wasn't that simple.. that appears to set the idle factor to the value in the last M906. Thanks
-
@oozebot
I have to check and see the behaviour on my printers. Interesting.... -
You are so right, missed that one. M906 line can only have one I value. I hope we can get a solution for this.
-
@oozebot I believe it's in the list to look at. It's currently only a single value for all
-
@jay_s_uk correct, I plan to support per-axis idle current percentage in RRF 3.5.
