Files not showing up on Panel SD card
-
I finally tried the sd card reader on the panel due. The panel acknowledged the card but no files showed up. I just saved a gcode file to the card and inserted it. Should it be saved in a certain way. Any help is appreciated.
-
Do you have the ribbon cable connected between PanelDue and the Duet? If so, how long is the cable?
-
Yes there is a ribbon cable connected. the cable is 30cm long. Should I go shorter?
-
30cm is usually OK.
In what way does PanelDue acknowledge the SD card?
-
It lets me switch from SD 0 to SD 1 only the files in 0 show up
-
What Duet firmware version and PanelDue firmware version are you running?
-
Duet Firmware is 1.18.1 and the PanelDue is 1.15c
-
It might be worth reformatting the SD card to FAT32 in case it's currently in a format that the firmware doesn't understand.