Accelerometer Wiring

[dang472]

HI,
I have a duet ethernet with a duex 5. I have 3 Thermocouples connected to 2 thermocouple daughterboards on the main boards

I was wondering if I could wire in a LIS3DSH. And am wondering which pins I should connect to.

[psychotik2k3]

@dang472 maybe the easiest for you is to use a toolboard v1.1 as it got an integrated accelerometer.

[dc42]

@dang472 are you saying that you have 4 daughter boards in total?

[dang472]

@dc42 Sorry for the delay. I have 2 daughter boards total. Both stacked on the duet ethernet.
The duex5 does not have any daughterboards on it.

[dang472]

@psychotik2k3
Hi,
The toolboard works for duet3. I am using a duet 2. I haven't made the jump to a duet 3 yet.
As it would entail reworking/wiring my whole setup.

[dc42]

@dang472 said in Accelerometer Wiring:

@dc42 Sorry for the delay. I have 2 daughter boards total. Both stacked on the duet ethernet.
The duex5 does not have any daughterboards on it.

In that case you can connect the accelerometer to the daughter board connector on the DueX5.