InputShaping-Plugin-0.2.0-pre4 released

[mfs12]

@siam, please check that all parameters are set in configure tab. I think you didn't set any axis to test.

BTW this is an known issue which I am trying to find a good solution.

[SIam]

@mfs12 reloading the DWC (F5) solved it

[SIam]

@mfs12 home device only if not homed seems not to work:

and here you can see that the machine always will be homed

[mfs12]

@SIam, can you send me you browser dev tools console log?

this might be helpful. best would be to share it via pastebin.

[SIam]

@mfs12
here we go

192.168.188.142-1633077580596.txt

[mfs12]

@SIam i am a little clueless. On my device it skips that stage. what happens when you hit the run button a second time?

[SIam]

@mfs12 said in InputShaping-Plugin-0.2.0-pre4 released:

i am a little clueless. On my device it skips that stage. what happens when you hit the run button a second time?

The printer will be first homed every time i press the run button

[mfs12]

@siam check your PM please.

[SIam]

@mfs12 now the homing is gone but i will get no output in the console when i start the test.

192.168.188.142-1633078804730.txt

[jay_s_uk]

@siam try uninstalling the plugin and reinstalling it

[mfs12]

please check the new release...

https://forum.duet3d.com/topic/25351/inputshaping-plugin-0-2-0-pre5-released/