InputShaping-Plugin-0.2.0-pre4 released

SIam

~~can't install it~~

2021-10-01 09_52_45-hypercube.png

something was going wrong, I'm sure that I have installed the latest DWC but today is the old DWC shown ?!?!?!

mfs12

@SIam, you need to upgrade RRF and DWC to 3.4.0-b4.

SIam

@mfs12 for now, it's working but i have a new error for you
2021-10-01 10_05_50-hypercube.png

mfs12

@siam, please check that all parameters are set in configure tab. I think you didn't set any axis to test.

BTW this is an known issue which I am trying to find a good solution.

SIam

@mfs12 reloading the DWC (F5) solved it

SIam

@mfs12 home device only if not homed seems not to work:

2021-10-01 10_26_46-hypercube.png

2021-10-01 10_27_09-hypercube.png

2021-10-01 10_27_28-hypercube.png

and here you can see that the machine always will be homed

2021-10-01 10_27_50-hypercube.png

mfs12

@SIam, can you send me you browser dev tools console log?

this might be helpful. best would be to share it via pastebin.

SIam

@mfs12
here we go

mfs12

@SIam i am a little clueless. On my device it skips that stage. what happens when you hit the run button a second time?

SIam

i am a little clueless. On my device it skips that stage. what happens when you hit the run button a second time?

The printer will be first homed every time i press the run button

mfs12

@siam check your PM please.

SIam

@mfs12 now the homing is gone but i will get no output in the console when i start the test.

jay_s_uk

@siam try uninstalling the plugin and reinstalling it

mfs12

please check the new release...