Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Small Fdm printer

    Scheduled Pinned Locked Moved
    General Discussion
    6
    12
    369
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • oliofundefined
      oliof @peirof
      last edited by

      @peirof you could take a look at Tiny-M.

      You can get Duet boards from re-sellers without issue.

      <>RatRig V-Minion Fly Super5Pro RRF<> V-Core 3.1 IDEX k*****r <> RatRig V-Minion SKR 2 Marlin<>

      peirofundefined 1 Reply Last reply Reply Quote 0
      • peirofundefined
        peirof @oliof
        last edited by

        @oliof Spain reseller its out stock... and some more

        oliofundefined 1 Reply Last reply Reply Quote 0
        • oliofundefined
          oliof @peirof
          last edited by

          @peirof Thankfully, you are in the EU (-: Depending on what you need you can check Dold Mechatronik (Germany), RatRig (Portugal, limited selection), and others.

          <>RatRig V-Minion Fly Super5Pro RRF<> V-Core 3.1 IDEX k*****r <> RatRig V-Minion SKR 2 Marlin<>

          1 Reply Last reply Reply Quote 0
          • PCRundefined
            PCR @peirof
            last edited by

            @peirof https://github.com/hartk1213/Micron

            peirofundefined 1 Reply Last reply Reply Quote 0
            • peirofundefined
              peirof @PCR
              last edited by

              @pcr thanks.... looks good...

              1 Reply Last reply Reply Quote 0
              • fcwiltundefined
                fcwilt @peirof
                last edited by

                @peirof said in Small Fdm printer:

                HI,

                I'm looking for recommendation for a printer Fdm DIY.

                So you are looking to build a printer from parts you purchase/make as opposed to kit?

                Frederick

                Printers: A FT-5 with the 713 upgrade bits, a custom MarkForged style, a small Utilmaker style, a small CoreXY from kit and a E3D MS/TC setup. Various hotends. Using Duets (2 and 3) running 3.4.6

                peirofundefined 1 Reply Last reply Reply Quote 0
                • peirofundefined
                  peirof @fcwilt
                  last edited by

                  @fcwilt i am open to all options....

                  what i search?

                  Small
                  Detail 0.05 layer or less

                  1 Reply Last reply Reply Quote 0
                  • Phaedruxundefined
                    Phaedrux Moderator
                    last edited by

                    Voron 0 maybe?

                    Z-Bot CoreXY Build | Thingiverse Profile

                    peirofundefined 1 Reply Last reply Reply Quote 0
                    • peirofundefined
                      peirof @Phaedrux
                      last edited by

                      @phaedrux Voron 0, looks great.... for the moment, its preselected...

                      Thanks to all

                      1 Reply Last reply Reply Quote 0
                      • tenajaundefined
                        tenaja
                        last edited by

                        look at the Dice. Might not be big enough for you, but should be precise enough.

                        peirofundefined 1 Reply Last reply Reply Quote 0
                        • peirofundefined
                          peirof @tenaja
                          last edited by

                          This post is deleted!
                          1 Reply Last reply Reply Quote 0
                          • First post
                            Last post
                          Unless otherwise noted, all forum content is licensed under CC-BY-SA