Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    [DSF Extension] Exec On MCode (was: Shutdown SBC)

    Scheduled Pinned Locked Moved
    DSF Development
    22
    117
    8.1k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • CrazyCreatorundefined
      CrazyCreator
      last edited by CrazyCreator

      Ok .. sounds good.

      But actually the script is not running correct ... the error popup on web-gui is the only reaction when I send M7722. The Raspi don't shut down or restart after this M7722 command.

      the terminal show what you see on my terminal screen in my last posting

      pi@CCC:/usr/local/bin $ sudo ./execonmcode -mCode 7722 -command "poweroff"
      2021/05/19 20:47:59 Connection to DCS closed
      2021/05/19 20:47:59 EOF

      I think that's the problem. But i have no idea how to fix this.
      I did the installation exactly as shown in the video.

      http://www.crazycreatorcube.com

      1 Reply Last reply Reply Quote 0
      • CrazyCreatorundefined
        CrazyCreator
        last edited by CrazyCreator

        nobody answer me? 😞

        when i try the command in terminal, connected with the Pi, with additional parameter
        i see this output

        pi@CCC:~ $ sudo /usr/local/bin/execonmcode -mCode 7722 -command poweroff -debug -trace
2021/05/20 15:54:21 7722: poweroff 
2021/05/20 15:54:21 [DEBUG] <Recv> {"version":11,"id":20}
2021/05/20 15:54:21 [DEBUG] <Send> {"Mode":"Intercept","Version":7,"InterceptionMode":"Pre"}
2021/05/20 15:54:21 [DEBUG] <Recv> {"success":true}
2021/05/20 15:54:21 [DEBUG] <Connect> Connection established

        but the Pi don't reboot or shut down ... no reaction
        on dwc the same ... no reaction

        http://www.crazycreatorcube.com

        wilrikerundefined 1 Reply Last reply Reply Quote 0
        • wilrikerundefined
          wilriker @CrazyCreator
          last edited by

          @crazycreator Can you check if the command poweroff does work on your system in the first place?

          Also please check execonmcode version (parameter -version). It looks to me as if you are using an older version.

          Manuel
          Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
          with probably always latest firmware/DWC (incl. betas or self-compiled)
          My Tool Collection

          CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
          • CrazyCreatorundefined
            CrazyCreator @wilriker
            last edited by

            @wilriker said in [DSF Extension] Exec On MCode (was: Shutdown SBC):

            Can you check if the command poweroff does work on your system in the first place?

            How can i do this?

            @wilriker said in [DSF Extension] Exec On MCode (was: Shutdown SBC):

            Also please check execonmcode version (parameter -version). It looks to me as if you are using an older version.

            pi@CCC:~ $ sudo /usr/local/bin/execonmcode -version
2021/05/20 16:20:43 0x24142bc
pi@CCC:~ $

            http://www.crazycreatorcube.com

            wilrikerundefined 1 Reply Last reply Reply Quote 0
            • wilrikerundefined
              wilriker @CrazyCreator
              last edited by

              @crazycreator said in [DSF Extension] Exec On MCode (was: Shutdown SBC):

              How can i do this?

              Run sudo poweroff and check what that does.

              pi@CCC:~ $ sudo /usr/local/bin/execonmcode -version
2021/05/20 16:20:43 0x24142bc
pi@CCC:~ $

              That looks like a bug in previous version and it may be that DCS is rejecting this client. Please get the version 5.2.0 of execonmcode from GitHub and try again.

              Manuel
              Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
              with probably always latest firmware/DWC (incl. betas or self-compiled)
              My Tool Collection

              CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
              • CrazyCreatorundefined
                CrazyCreator @wilriker
                last edited by

                @wilriker I used 5.1 so that I could imitate the tutorial 100%. now I'm back on 5.2

                sudo poweroff

                pi@CCC:~ $ sudo poweroff
Connection to ccc.local closed by remote host.
Connection to ccc.local closed.

                Versionscheck

                pi@CCC:~ $ sudo /usr/local/bin/execonmcode --version
5.2.0

                Debug and Trace

                pi@CCC:~ $ sudo /usr/local/bin/execonmcode -mCode 7722 -command -poweroff -debug -trace
2021/05/20 16:35:27 7722: -poweroff 
2021/05/20 16:35:27 [DEBUG] <Recv> {"version":11,"id":21}
2021/05/20 16:35:27 [DEBUG] <Send> {"Mode":"Intercept","Version":10,"InterceptionMode":"Pre","Channels":["HTTP","Telnet","File","USB","Aux","Trigger","Queue","LCD","SBC","Daemon","Aux2","AutoPause","Unknown"],"Filters":["M7722"],"PriorityCodes":false}
2021/05/20 16:35:27 [DEBUG] <Recv> {"success":true}
2021/05/20 16:35:27 [DEBUG] <Connect> Connection established

                put the M7722 command in DWC Console ... show me this in terminal

                2021/05/20 16:35:58 Connection to DCS closed
2021/05/20 16:35:58 [DEBUG] <Close> Closing connection
2021/05/20 16:35:58 EOF

                http://www.crazycreatorcube.com

                wilrikerundefined 1 Reply Last reply Reply Quote 0
                • wilrikerundefined
                  wilriker @CrazyCreator
                  last edited by

                  @crazycreator said in [DSF Extension] Exec On MCode (was: Shutdown SBC):

                  pi@CCC:~ $ sudo /usr/local/bin/execonmcode -mCode 7722 -command -poweroff -debug -trace

                  At least this time you used -poweroff which most likely is not a valid command. 😉

                  Manuel
                  Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
                  with probably always latest firmware/DWC (incl. betas or self-compiled)
                  My Tool Collection

                  CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
                  • CrazyCreatorundefined
                    CrazyCreator @wilriker
                    last edited by CrazyCreator

                    @wilriker
                    but in shutdownsbc.service is used and in the video tutorial too.

                    What should I write / use that instead?

                    What else can I try to get the script to work?

                    http://www.crazycreatorcube.com

                    wilrikerundefined 1 Reply Last reply Reply Quote 0
                    • wilrikerundefined
                      wilriker @CrazyCreator
                      last edited by

                      @crazycreator Just remove the dash from the start of poweroff then it should work.

                      Manuel
                      Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
                      with probably always latest firmware/DWC (incl. betas or self-compiled)
                      My Tool Collection

                      CrazyCreatorundefined 2 Replies Last reply Reply Quote 0
                      • CrazyCreatorundefined
                        CrazyCreator @wilriker
                        last edited by

                        @wilriker
                        you mean so:

                        pi@CCC:~ $ sudo /usr/local/bin/execonmcode -mCode 7722 -command poweroff -debug -trace
2021/05/20 18:47:03 7722: poweroff 
2021/05/20 18:47:03 [DEBUG] <Recv> {"version":11,"id":80}
2021/05/20 18:47:03 [DEBUG] <Send> {"Mode":"Intercept","Version":10,"InterceptionMode":"Pre","Channels":["HTTP","Telnet","File","USB","Aux","Trigger","Queue","LCD","SBC","Daemon","Aux2","AutoPause","Unknown"],"Filters":["M7722"],"PriorityCodes":false}
2021/05/20 18:47:03 [DEBUG] <Recv> {"success":true}
2021/05/20 18:47:03 [DEBUG] <Connect> Connection established

                        http://www.crazycreatorcube.com

                        1 Reply Last reply Reply Quote 0
                        • CrazyCreatorundefined
                          CrazyCreator @wilriker
                          last edited by

                          @wilriker
                          When I send M7722 in the DWC Console I get the familiar popup with the message:
                          M7722
                          Warning: M7722: Command is not supported

                          But the Raspberry does not switch off or restarts!

                          When I send the M7722 command in the DWC console, I see the following lines in the terminal:

                          2021/05/20 18:47:47 Connection to DCS closed
2021/05/20 18:47:47 [DEBUG] <Close> Closing connection
2021/05/20 18:47:47 EOF

                          http://www.crazycreatorcube.com

                          oozeBotundefined 1 Reply Last reply Reply Quote 0
                          • oozeBotundefined
                            oozeBot @CrazyCreator
                            last edited by

                            @crazycreator One note that I've found is that when rebooting or powering off the SBC from a custom mCode, DCW will report "Command not supported" as the API immediately shuts down. See this thread:

                            • https://forum.duet3d.com/topic/20968/3-2-final-execonmcode-warning-issue
                            CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
                            • CrazyCreatorundefined
                              CrazyCreator @oozeBot
                              last edited by

                              @oozebot
                              thanks for the hint. I've already read that while looking for a solution to my problem.

                              if execonmcode would run, then the message would be pretty irrelevant to me;) ... but unfortunately I can't do that

                              http://www.crazycreatorcube.com

                              wilrikerundefined 1 Reply Last reply Reply Quote 0
                              • wilrikerundefined
                                wilriker @CrazyCreator
                                last edited by

                                @crazycreator TBH I have no idea why it does not work for you. Can you please post the output of

                                sudo journalctl -eu duetcontrolserver

                                after you sent M7722 and execonmcode reported EOF?

                                Also another idea, please try the absolute path to poweroff, i.e. /usr/bin/poweroff.

                                Manuel
                                Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
                                with probably always latest firmware/DWC (incl. betas or self-compiled)
                                My Tool Collection

                                CrazyCreatorundefined 2 Replies Last reply Reply Quote 0
                                • CrazyCreatorundefined
                                  CrazyCreator @wilriker
                                  last edited by

                                  @wilriker
                                  this the output:

                                  pi@CCC:~ $ sudo /usr/local/bin/execonmcode -mCode 7722 -command poweroff -debug -trace
2021/05/20 20:27:38 7722: poweroff 
2021/05/20 20:27:38 [DEBUG] <Recv> {"version":11,"id":114}
2021/05/20 20:27:38 [DEBUG] <Send> {"Mode":"Intercept","Version":10,"InterceptionMode":"Pre","Channels":["HTTP","Telnet","File","USB","Aux","Trigger","Queue","LCD","SBC","Daemon","Aux2","AutoPause","Unknown"],"Filters":["M7722"],"PriorityCodes":false}
2021/05/20 20:27:38 [DEBUG] <Recv> {"success":true}
2021/05/20 20:27:38 [DEBUG] <Connect> Connection established
2021/05/20 20:27:47 Connection to DCS closed
2021/05/20 20:27:47 [DEBUG] <Close> Closing connection
2021/05/20 20:27:47 EOF
pi@CCC:~ $ sudo journalctl -eu duetcontrolserver
May 20 18:31:16 CCC DuetControlServer[424]: [warn] IPC#67: Client with outdated protocol version connected (got 10, want 11)
May 20 18:40:55 CCC DuetControlServer[424]: [warn] IPC#69: Client with outdated protocol version connected (got 10, want 11)
May 20 18:43:43 CCC DuetControlServer[424]: [warn] IPC#70: Client with outdated protocol version connected (got 10, want 11)
May 20 18:44:42 CCC DuetControlServer[424]: [warn] IPC#72: Client with outdated protocol version connected (got 10, want 11)
May 20 18:45:54 CCC DuetControlServer[424]: [warn] IPC#75: Client with outdated protocol version connected (got 10, want 11)
May 20 18:46:20 CCC DuetControlServer[424]: [warn] IPC#77: Client with outdated protocol version connected (got 10, want 11)
May 20 18:46:25 CCC DuetControlServer[424]: [warn] IPC#78: Client with outdated protocol version connected (got 10, want 11)
May 20 18:47:03 CCC DuetControlServer[424]: [warn] IPC#80: Client with outdated protocol version connected (got 10, want 11)
May 20 18:47:06 CCC DuetControlServer[424]: [warn] IPC#81: Client with outdated protocol version connected (got 10, want 11)
May 20 18:47:58 CCC DuetControlServer[424]: [warn] IPC#83: Client with outdated protocol version connected (got 10, want 11)
May 20 18:48:08 CCC DuetControlServer[424]: [warn] IPC#85: Client with outdated protocol version connected (got 10, want 11)
May 20 18:58:23 CCC DuetControlServer[424]: [info] Starting macro file homeall.g on channel HTTP
May 20 18:58:23 CCC DuetControlServer[424]: [info] Starting macro file homey.g on channel HTTP
May 20 18:58:28 CCC DuetControlServer[424]: [info] Finished macro file homey.g
May 20 18:58:28 CCC DuetControlServer[424]: [info] Starting macro file homex.g on channel HTTP
May 20 18:58:32 CCC DuetControlServer[424]: [info] Finished macro file homex.g
May 20 18:58:32 CCC DuetControlServer[424]: [info] Starting macro file homez.g on channel HTTP
May 20 18:58:47 CCC DuetControlServer[424]: [info] Starting macro file bed.g on channel HTTP
May 20 18:59:14 CCC DuetControlServer[424]: [info] Finished macro file bed.g
May 20 18:59:15 CCC DuetControlServer[424]: [info] Finished macro file homez.g
May 20 18:59:15 CCC DuetControlServer[424]: [info] Finished macro file homeall.g
May 20 20:26:35 CCC DuetControlServer[424]: [warn] IPC#109: Client with outdated protocol version connected (got 10, want 11)
May 20 20:27:38 CCC DuetControlServer[424]: [warn] IPC#114: Client with outdated protocol version connected (got 10, want 11)
lines 74-96/96 (END)

                                  http://www.crazycreatorcube.com

                                  1 Reply Last reply Reply Quote 0
                                  • CrazyCreatorundefined
                                    CrazyCreator @wilriker
                                    last edited by CrazyCreator

                                    @wilriker
                                    and with the absolute path:

                                    pi@CCC:~ $ sudo /usr/local/bin/execonmcode -mCode 7722 -command /usr/bin/poweroff -debug -trace
2021/05/20 20:31:12 7722: /usr/bin/poweroff 
2021/05/20 20:31:12 [DEBUG] <Recv> {"version":11,"id":117}
2021/05/20 20:31:12 [DEBUG] <Send> {"Mode":"Intercept","Version":10,"InterceptionMode":"Pre","Channels":["HTTP","Telnet","File","USB","Aux","Trigger","Queue","LCD","SBC","Daemon","Aux2","AutoPause","Unknown"],"Filters":["M7722"],"PriorityCodes":false}
2021/05/20 20:31:12 [DEBUG] <Recv> {"success":true}
2021/05/20 20:31:12 [DEBUG] <Connect> Connection established
2021/05/20 20:31:48 Connection to DCS closed
2021/05/20 20:31:48 [DEBUG] <Close> Closing connection
2021/05/20 20:31:48 EOF
pi@CCC:~ $ sudo journalctl -eu duetcontrolserver
May 20 18:44:42 CCC DuetControlServer[424]: [warn] IPC#72: Client with outdated protocol version connected (got 10, want 11)
May 20 18:45:54 CCC DuetControlServer[424]: [warn] IPC#75: Client with outdated protocol version connected (got 10, want 11)
May 20 18:46:20 CCC DuetControlServer[424]: [warn] IPC#77: Client with outdated protocol version connected (got 10, want 11)
May 20 18:46:25 CCC DuetControlServer[424]: [warn] IPC#78: Client with outdated protocol version connected (got 10, want 11)
May 20 18:47:03 CCC DuetControlServer[424]: [warn] IPC#80: Client with outdated protocol version connected (got 10, want 11)
May 20 18:47:06 CCC DuetControlServer[424]: [warn] IPC#81: Client with outdated protocol version connected (got 10, want 11)
May 20 18:47:58 CCC DuetControlServer[424]: [warn] IPC#83: Client with outdated protocol version connected (got 10, want 11)
May 20 18:48:08 CCC DuetControlServer[424]: [warn] IPC#85: Client with outdated protocol version connected (got 10, want 11)
May 20 18:58:23 CCC DuetControlServer[424]: [info] Starting macro file homeall.g on channel HTTP
May 20 18:58:23 CCC DuetControlServer[424]: [info] Starting macro file homey.g on channel HTTP
May 20 18:58:28 CCC DuetControlServer[424]: [info] Finished macro file homey.g
May 20 18:58:28 CCC DuetControlServer[424]: [info] Starting macro file homex.g on channel HTTP
May 20 18:58:32 CCC DuetControlServer[424]: [info] Finished macro file homex.g
May 20 18:58:32 CCC DuetControlServer[424]: [info] Starting macro file homez.g on channel HTTP
May 20 18:58:47 CCC DuetControlServer[424]: [info] Starting macro file bed.g on channel HTTP
May 20 18:59:14 CCC DuetControlServer[424]: [info] Finished macro file bed.g
May 20 18:59:15 CCC DuetControlServer[424]: [info] Finished macro file homez.g
May 20 18:59:15 CCC DuetControlServer[424]: [info] Finished macro file homeall.g
May 20 20:26:35 CCC DuetControlServer[424]: [warn] IPC#109: Client with outdated protocol version connected (got 10, want 11)
May 20 20:27:38 CCC DuetControlServer[424]: [warn] IPC#114: Client with outdated protocol version connected (got 10, want 11)
May 20 20:27:57 CCC DuetControlServer[424]: [warn] IPC#116: Client with outdated protocol version connected (got 10, want 11)
May 20 20:31:12 CCC DuetControlServer[424]: [warn] IPC#117: Client with outdated protocol version connected (got 10, want 11)
May 20 20:31:58 CCC DuetControlServer[424]: [warn] IPC#119: Client with outdated protocol version connected (got 10, want 11)
lines 77-99/99 (END)

                                    http://www.crazycreatorcube.com

                                    wilrikerundefined 1 Reply Last reply Reply Quote 0
                                    • wilrikerundefined
                                      wilriker @CrazyCreator
                                      last edited by wilriker

                                      @crazycreator Hm, there is something strange here. I can now reproduce your issue. I have to investigate that.

                                      EDIT: It seems that you discovered a but in DCS 3.3-rc2 (and possibly earlier) that will be fixed in the next RC (I have to confirm that still).

                                      Manuel
                                      Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
                                      with probably always latest firmware/DWC (incl. betas or self-compiled)
                                      My Tool Collection

                                      CrazyCreatorundefined 1 Reply Last reply Reply Quote 0
                                      • CrazyCreatorundefined
                                        CrazyCreator @wilriker
                                        last edited by

                                        @wilriker
                                        Why does this always have to happen to me?

                                        Which RRF version do you use?
                                        How long do you think it will take to get to the RC?

                                        http://www.crazycreatorcube.com

                                        wilrikerundefined 1 Reply Last reply Reply Quote 0
                                        • wilrikerundefined
                                          wilriker @CrazyCreator
                                          last edited by

                                          @crazycreator It's not RRF but DSF (DCS to be exact) that has that problem. And the next RC is planned to be released within the next couple of days unless important issues will postpone it.

                                          Manuel
                                          Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
                                          with probably always latest firmware/DWC (incl. betas or self-compiled)
                                          My Tool Collection

                                          oozeBotundefined 1 Reply Last reply Reply Quote 0
                                          • CrazyCreatorundefined
                                            CrazyCreator
                                            last edited by

                                            @wilriker
                                            then I will probably have to wait ... or you can send me an image of your SD card 😄

                                            http://www.crazycreatorcube.com

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA