Duex5 not showing up in "Machine-Specific"

jontek2

Hey!

I've just noticed that my Duex5 is no longer showing up under Settings -> Machine-Specifics and "Electronics".

It's lists:

Board: Duet 2 WiFi (2WiFi)
Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.1.1 (2020-05-19b2)
Duet WiFi Server Version: 1.23

And if i run "Diagnostic" it recognises the duex;

M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.1.1 running on Duet WiFi 1.02 or later + DueX5

Can anybody with a Duet2Wifi + Duex and Duet Web Control 3.1.1 check their?

jontek2

Oh yeah, i forgot to mention that the board works just fine. I've got two fans, one motor and a bltouch connected to it.

Phaedrux

I think the machine specific tab has lost some functionality in RRF3 that is intended to be added back with more info from the object model.

jontek2

Puh, that's nice to hear. I thought i've got an issue.

It would be great if anybody with a duet2wifi and a duex running the latest firmware and DWC could confirm this.

sebkritikel

@jontek2 said in Duex5 not showing up in "Machine-Specific":

Puh, that's nice to hear. I thought i've got an issue.

It would be great if anybody with a duet2wifi and a duex running the latest firmware and DWC could confirm this.

M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.2-beta3.2 running on Duet WiFi 1.02 or later + DueX5

No issues to speak of with my machine. I think you'll be good to go!

dc42

I think the difference is that DWC 3.2 gets the electronics info from the object model, and that doesn't include the DueX. I'll look at adding the DueX information.

jontek2

@sebkritikel Big thanks!

@dc42 Awesome!

Happy new year

RodrigoRMaraujo

Hello @dc42 .

Could you tell if this documentation is already available?
I'm having difficulties to map the duex5 pins, to use them with M950.
Thanks.

Phaedrux

@rodrigormaraujo Which pins are you trying to use?

https://duet3d.dozuki.com/Wiki/RepRapFirmware_3_overview#Section_Pin_names_for_Duet_2_WiFi_Ethernet

RodrigoRMaraujo

@phaedrux
I'm still learning about pins and I'm still not sure which ones I can use. For now I'm using the 2 to 6 duex endstop pins for extruders. I wish I could use some more, to put physical buttons and trigger macros. They can be in the duet or in the duex.
Thanks for replying with the link, I haven't seen this list yet.

Phaedrux

@rodrigormaraujo said in Duex5 not showing up in "Machine-Specific":

@phaedrux
I'm still learning about pins and I'm still not sure which ones I can use. For now I'm using the 2 to 6 duex endstop pins for extruders. I wish I could use some more, to put physical buttons and trigger macros. They can be in the duet or in the duex.
Thanks for replying with the link, I haven't seen this list yet.

Probably best to start a new thread with the details of what you want to do.

RodrigoRMaraujo

@phaedrux Yes thanks. I had already done that.
https://forum.duet3d.com/topic/24878/physical-buttons-to-run-macros-using-duex5-with-rrf3-3