RepRapFirmware 3.2-RC1 released

ctilley79

Would have been nice to know that was a autocomplete dropdown and not a standard dropdown. Gotta love Vue.js

Exerqtor

I keep getting this error when i try to install it:

Error: M997: In-application programming binary "Duet2CombinedIAP.bin" not found

Trying to run the update on a 1.03 wifi board that's running 3.2-beta4.1 atm.

chrishamm

@Exerqtor This file is part of the 3.1.1 bundle here. Upload the included Duet2CombinedIAP.bin on the System page and then update to 3.2-RC1.

Exerqtor

@chrishamm said in RepRapFirmware 3.2-RC1 released:

@Exerqtor This file is part of the 3.1.1 bundle here. Upload the included Duet2CombinedIAP.bin on the System page and then update to 3.2-RC1.

Well weird that it had went awol in my /sys

But thanks it sure fixed the issue

smoki3

I tried to flash a firmware on my Duet2 SBC. I flash the file RC1 before with bossa.
If I try to update now or run a M997 S0 I get this:

Error: M997: Failed to find firmware file /opt/dsf/sd/sys/Duet2Firmware_SBC.bin

I checked the sys folder. And the file is there

wilriker

@smoki3 said in RepRapFirmware 3.2-RC1 released:

I tried to flash a firmware on my Duet2 SBC. I flash the file RC1 before with bossa.
If I try to update now or run a M997 S0 I get this:
Error: M997: Failed to find firmware file /opt/dsf/sd/sys/Duet2Firmware_SBC.bin
I checked the sys folder. And the file is there

Are you certain? The filename has changed minorly from

Duet2Firmware_2SBC.bin

to

Duet2Firmware_SBC.bin

Not the missing "2" before "SBC". After flashing RC1 this file needs to be renamed manually in case you want to flash it again.

smoki3

@wilriker Omg.... Thats it.

But any way I compiled the firmware this morning and the output was still a Duet2Firmware_2SBC.bin file?

dc42

@smoki3 said in RepRapFirmware 3.2-RC1 released:

@wilriker Omg.... Thats it.

But any way I compiled the firmware this morning and the output was still a Duet2Firmware_2SBC.bin file?

I have just fixed that.

smoki3

Is it just me or is the http rr_status request not working?

jay_s_uk

@smoki3 the SBC version uses /machine/status and not rr_status