RepRapFirmware 3.2-RC1 released

chrishamm

Please note that SBC users may see an error message in the Linux console when RRF has been upgraded. This message does not mean anything and it can be safely ignored. This will be corrected in the next version.

ctilley79

The dropdown menus for temperature in the tools section of DWC are not populating. Thought I noticed this on beta 4.1 as well. Duet WiFi with 1.25b0 wifi server, and RC1 for both firmware and DWC.

chrishamm

@ctilley79 This is working well for me. Did you perhaps activate "Disable auto-completion" on the Settings -> General page?

ctilley79

That was it. I turned that off and it worked.

ctilley79

Would have been nice to know that was a autocomplete dropdown and not a standard dropdown. Gotta love Vue.js

Exerqtor

I keep getting this error when i try to install it:

Error: M997: In-application programming binary "Duet2CombinedIAP.bin" not found

Trying to run the update on a 1.03 wifi board that's running 3.2-beta4.1 atm.

chrishamm

@Exerqtor This file is part of the 3.1.1 bundle here. Upload the included Duet2CombinedIAP.bin on the System page and then update to 3.2-RC1.

Exerqtor

@chrishamm said in RepRapFirmware 3.2-RC1 released:

@Exerqtor This file is part of the 3.1.1 bundle here. Upload the included Duet2CombinedIAP.bin on the System page and then update to 3.2-RC1.

Well weird that it had went awol in my /sys

But thanks it sure fixed the issue

smoki3

I tried to flash a firmware on my Duet2 SBC. I flash the file RC1 before with bossa.
If I try to update now or run a M997 S0 I get this:

Error: M997: Failed to find firmware file /opt/dsf/sd/sys/Duet2Firmware_SBC.bin

I checked the sys folder. And the file is there

wilriker

@smoki3 said in RepRapFirmware 3.2-RC1 released:

I tried to flash a firmware on my Duet2 SBC. I flash the file RC1 before with bossa.
If I try to update now or run a M997 S0 I get this:
Error: M997: Failed to find firmware file /opt/dsf/sd/sys/Duet2Firmware_SBC.bin
I checked the sys folder. And the file is there

Are you certain? The filename has changed minorly from

Duet2Firmware_2SBC.bin

to

Duet2Firmware_SBC.bin

Not the missing "2" before "SBC". After flashing RC1 this file needs to be renamed manually in case you want to flash it again.

smoki3

@wilriker Omg.... Thats it.

But any way I compiled the firmware this morning and the output was still a Duet2Firmware_2SBC.bin file?

dc42

@smoki3 said in RepRapFirmware 3.2-RC1 released:

@wilriker Omg.... Thats it.

But any way I compiled the firmware this morning and the output was still a Duet2Firmware_2SBC.bin file?

I have just fixed that.

smoki3

Is it just me or is the http rr_status request not working?

jay_s_uk

@smoki3 the SBC version uses /machine/status and not rr_status