Little help to build rrf3

seraser

@oliof @dc42 thank you very much.

The problem is gnu arm eclipse is installed in program files due is 64 bits and gnu tools arm is in program files x86 due is 32 bits.

So I copy paste bin folder from the first one to the second one and bomm, rm and make is fine and compiled fine CoreNG, yeah.

seraser

Well, compiled fine CoreNg, FreeRTOS, RRFLibraries and RepRapFirmware but I cant see Duetcombined.bin, I think set duetwifi is needed but I dont Know in this moment.

And the path to edit active motors to free ram.

Only a little little help is needed.

Thank you.

dc42

Looks like you have built the legacy Duet configuration, because I see Duet085 in the path in that output window. The build configuration you want will be called DuetNG or Duet 2.

seraser

Compile 2.05 branch fine but 3.2beta3.2 have errors and dont compile.

oliof

Try building RepRapFirmware 3.1.1 first

checkout with the 3.1.1 / 3.1 tags as needed (see BuildInstructions)
clean all projects
make sure you have the right Build Configurations selected
rebuild all projects in the right order

If you managed to build 3.1.1, check out the appropriate latest dev /3.02-dev branches, clean and rebuild all projects again.

seraser

@oliof all your instructions done with 3.1.1. but no luck errors appear with right build configurations checked in buildinstructions and clean projects before compile Reprapfirmware.

dc42

I think you are using the wrong branch of the RRFLibraries project. Use the dev branch for RRF 3.1 and later. Likewise, use the dev branch of FreeRTOS.

seraser

@dc42 I use this files:

Changed toFreeRTOS dev branch all compiled and clean before compile Reprapfirmware and same errors.

This is my build configuration of all projects:

CoreNG SAM4E8E
FreeRTOS SAM4E
RRFLibraries SAM4E_RTOS
Reprapfirmware Duet2_RTOS

Are fine RRFLibraries and Reprapfirmware with RTOS added?

Thank you

seraser

Finally compiled latest version 3.2beta3.2 with only 5 motors active so great for me after few days, thank you @oliof and @dc42

oliof

Glad you could figure it out!