Duet 0.8.5
-
I Know these are presently out of stock, but when available will they work on a duet 0.8.5 fitted to a mini kossel?
It is running the latest software. -
Duet 0.8.5 hasn't been manufactured for many years. All current Duets can control a Mini Kossel. Currently the most suitable Duet in production would be the Duet WiFi or Duet Ethernet (Duet Maestro would also work, production has ended). At the end of this year or early next year, the Duet 3 Mini will be another possibility.
You can find a comparison of all the Duets at https://duet3d.dozuki.com/Wiki/The_Duet_family_of_motion_control_electronics.
HTH David
-
Thanks for the reply David, but the duet is working fine. I meant will the filament monitor work with the 0.8.5 board.
-
I think it should, but AFAIK that combination has never been tested.
