Cannot Connect To The WEB Interface With Duet WiFi

762x51

Also, If I send M105 to check the firmware version I get no response.

fcwilt

Hi,

When the DuetWifi is running as an ACCESS POINT you first have to connect to it using, say, a laptop or other WiFi capable device like a tablet.

The SSID is DuetWiFi.

Once you have connected you will configure the DuetWifi to run as a WiFi client. Then the DuetWiFi can connect to your home WiFi network.

Assuming you have a home WiFi network.

Once the DuetWiFi is connected to your home WiFi network it will report, via the USB connection, the IP address it has been assigned by your Router.

When you have that IP address then you can connect via a browser to the DuetWiFi web server.

Make sense?

Or have you already done all that?

Frederick

762x51

Hi Frederick,

I was able to connect to the Duet with a laptop and it returned a address of 192.168.1.100 but I don't know how to configure the Duet as a WiFi client. I'm using Windows 7 and the network sharing center shows the Duet as a Public Network. The Pronterface monitor shows this: WiFi is running as an access point with name DuetWiFi

If you have time would you show me how to configure the Duet as a WiFi client. In the meanwhile, I'll be doing a lot of reading - :>)

Orin

dc42

Have you followed the step by step instructions at https://duet3d.com/wiki/Getting_connected_to_the_Duet_WiFi ?

762x51

Yes I have - In my first note in this thread I said I got as far as step 8 and essentially that's where I still stop.

T3P3Tony

Connect to the DuetWifi access point, then find your home network SSID in the list, enter your home network password and save that. Reboot the Duet and it will attempt to connect to your home network

762x51

@T3P3Tony:

Connect to the DuetWifi access point, via the USB port ?

then find your home network SSID in the list I have that SSID

, enter your home network password I have that

and save that. Where do I save the SSID and password and how do I save it? Do I use Pronterface? Is there an associated M command

Reboot the Duet and it will attempt to connect to your home network

Thanks,
Orin

Jackal

After you connect to DuetWifi access point, go to 192.168.1.1 via your browser.
There is a step by step instruction on the wiki
https://duet3d.com/wiki/Getting_connected_to_the_Duet_WiFi

762x51

I have tried that using both Windows Internet Explorer and Google Chrome and both just sit and search and never connect.

Regarding the Step by step guide. I can never get past step 8

Phytone3d

So step 8 is connecting via wifi

your computer is on WiFi, do you have a list of access Points?
If so do you see the Duet an access Point? If not, are you seeing any access points?

762x51

@Phytone3d:

So step 8 is connecting via wifi

your computer is on WiFi, do you have a list of access Points? Yes I do

If so do you see the Duet an access Point? Yes I see it and I can connect to it via WiFi

762x51

@dc42:

Have you followed the step by step instructions at https://duet3d.com/wiki/Getting_connected_to_the_Duet_WiFi ?

I have spent hours and made multiple attempts trying to get my Duet to respond to step 8 in the step-by-step guide and have never gotten the Duet to respond. Should I assume that the Duet I have is defective?

dc42

You said :

If so do you see the Duet an access Point? Yes I see it and I can connect to it via WiFi

When you connect to it, does it display a list of the SSIDs of the wifi networks it can see, and are you able to select the one you want and enter the password for it?

I'm out of the office at present, otherwise I would provide a screenshot of what that list should look like.