Duet Wifi board. Can i use a USB Print Server to get to DWC?
-
Hi @jallen810,
connecting something to the USB port wouldn't give you access to the DWC.
the printserver of your company is neither of use as a "virtual lan adapter" nor as a printserver itself.the easiest way is attaching a panel-due to your duet.
or, maybe you can convert your DuetWifi to a LAN version.
its described in the following post
https://forum.duet3d.com/topic/2890/converting-a-duet-wifi-to-a-duet-ethernet/2 -
@bearer Our IT is funny about using WiFi on unknown equipment. Above my pay grade.
Essentially, i just want to be able to access it on our network (LAN) from my laptop <10ft away. -
@jallen810 said in Duet Wifi board. Can i use a USB Print Server to get to DWC?:
Essentially, i just want to be able to access it on our network (LAN) from my laptop <10ft away.
Phaedrux mentioned a good method: put the Duet in access point mode, and use the laptop to connect to that access point. This way you are not using the company network at all.
-
@jallen810 said in Duet Wifi board. Can i use a USB Print Server to get to DWC?:
@bearer Our IT is funny about using WiFi on unknown equipment. Above my pay grade.
Essentially, i just want to be able to access it on our network (LAN) from my laptop <10ft away.USB cable is probably your best bet if not able to replace the wifi module with an ethernet one.
-
https://duet3d.dozuki.com/Wiki/Gcode#Section_M589_Configure_access_point_parameters
This would be the quickest way to get you up and running.
-
@bearer Can you control the DWC that way? Or would i just have the Simplify3D/Cura/etc. control screen?
-
@Phaedrux But don't you have to have the WiFi SSID and P/W to do a M589? I have a fixed IP address from the Print Server that is ready to go, basically I just need the Duet to output an IP address to get to the DWC
-
You can send that command (and any other commands you need to get connected) via USB.
-
@jallen810 no this is to create your own access point on the printer that you connect to so you get to name it.
-
@Phaedrux I don't follow that, sorry not in IT so my networking skills are lacking a bit. Can you elaborate? What would I need to tell my IT guy to understand what we need to do?
-
With access point mode, you don't need to connect the printer to anything else on your network. Instead the duet creates its own low power wifi network that you connect to with your laptop to monitor it and send files. See if that's acceptable to your IT department.
-
@Phaedrux said in Duet Wifi board. Can i use a USB Print Server to get to DWC?:
With access point mode, you don't need to connect the printer to anything else on your network. Instead the duet creates its own low power wifi network that you connect to with your laptop to monitor it and send files. See if that's acceptable to your IT department.
That would be awesome, can you point me to the instructions in the guide to do this? Or is it as simple and giving the Duet the M589 followed a made-up SSID and P/W for me to find with my Laptop?
-
@jallen810 said in Duet Wifi board. Can i use a USB Print Server to get to DWC?:
@bearer Can you control the DWC that way? Or would i just have the Simplify3D/Cura/etc. control screen?
If you're not as you say "in IT" then I don't think trying to get DWC to work outside of the standard means is a good path.
As far as running the Duet as an Access Point you determine what SSID and password used to create a new network. If your computer has a wireless network adapter you can connect the computer to the Duet instead of the other way around. But still check with IT, they might have issues with "rouge" Access Points for various reasons.
-
@bearer said in Duet Wifi board. Can i use a USB Print Server to get to DWC?:
@jallen810 said in Duet Wifi board. Can i use a USB Print Server to get to DWC?:
@bearer Can you control the DWC that way? Or would i just have the Simplify3D/Cura/etc. control screen?
If you're not as you say "in IT" then I don't think trying to get DWC to work outside of the standard means is a good path.
As far as running the Duet as an Access Point you determine what SSID and password used to create a new network. If your computer has a wireless network adapter you can connect the computer to the Duet instead of the other way around. But still check with IT, they might have issues with "rouge" Access Points for various reasons.
Okay i think that is what @Phaedrux is also saying, is there a guide on the Duet Dozuki that i can follow that you can point me to?
-
M589 is all you need. That link is all there is for how to do it. You just need to send that command over a usb console connection.
-
@jallen810 said in Duet Wifi board. Can i use a USB Print Server to get to DWC?:
Okay i think that is what @Phaedrux is also saying
indeed, just make up a SSID and password to substitute in
M589 S"SSID" P"password"Password might need to be 8 characters if it doesn't work
-
@bearer said in Duet Wifi board. Can i use a USB Print Server to get to DWC?:
@jallen810 said in Duet Wifi board. Can i use a USB Print Server to get to DWC?:
Okay i think that is what @Phaedrux is also saying
indeed, just make up a SSID and password to substitute in
M589 S"SSID" P"password"Password might need to be 8 characters if it doesn't work
Bear in mind that anyone with the password will be able to control the printer from a smartphone. So choose something difficult to guess! WPA requires 8 characters minimum.
Duet WiFi hardware designer and firmware engineer
Please do not ask me for Duet support via PM or email, use the forum
http://www.escher3d.com, https://miscsolutions.wordpress.com -
@dc42 said in Duet Wifi board. Can i use a USB Print Server to get to DWC?:
s minimum.
Excellent, this is perfect. I think this is a safe way for us to limit access. You've been a great help!
-
@dc42 said in Duet Wifi board. Can i use a USB Print Server to get to DWC?:
WPA requires 8 characters minimum.
Some ambiguity there, if its a password then less than 8 characters can be supported, as the long-enough key will be hashed from the password to form the PMK. On the other hand if an actual key is supplied as the PSK it is used as the PMK directly, its all part of 802.11i if anyone needs a sleeping pill:P
But I guess you answered the question weather or not the Duet2Wifi needs a minimum of 8. As does most devices.
-
@bearer @dc42 When i type on the Duet screen:
M589 S"SSID" P"password"
and hit enter, the machine tells me there is a WiFi error. I tried turning wifi on and running a M552 S0 and then re-did the M589 but then it doesn't do anything.
Did i do something wrong?
Does this have to be done on the computer or can it be done directly on the Duet screen
