diy panel due
-
hi after tinker around with the duet i have add a raspberry pi to stream a cam trough octoprint
make me think that i have a raspberry pi touch display so i wonder can i make a better panel due with bigger display than panel due I7 do any one have a idea or know how to help -
you could just display the dwc in a browser window on the pi display.
-
@poohzaza said in diy panel due:
hi after tinker around with the duet i have add a raspberry pi to stream a cam trough octoprint
make me think that i have a raspberry pi touch display so i wonder can i make a better panel due with bigger display than panel due I7 do any one have a idea or know how to helpYes you could do that; but it might be easier to run Duet Web Control on the Pi.
-
@dc42 hi dose the duet web control support touch screen display and cam stream
-
@poohzaza said in diy panel due:
@dc42 hi dose the duet web control support touch screen display and cam stream
Yes.
-
how to conect duet 2 wifi to raspberry and run duet web interface
-
The Duet 2 Wifi doesn't connect to a raspberry pi natively. The web interface runs on the Duet itself. It's already on there, you just connect to it.
https://duet3d.dozuki.com/Wiki/Step_by_step_guide
It is possible to use a raspberry pi running octoprint and connecting to the Duet via USB allowing the octopi to completely control printing, but that isn't recommended for a few reasons. You lose a lot of the nice features of the Duet and printing over USB is prone to issues.
-
-
Yes, you connect the Duet to the network and then connect to the Duet through its ip address in a browser.
-
i want to connect by panel due port and have a direct connection via a wire in serial what should i do
-
@poohzaza said in diy panel due:
i want to connect by panel due port and have a direct connection via a wire in serial what should i do
Buy a PanelDue, or create/write the equivalent.
The physical port is 3.3V TTL Async Serial. The data that flows over it is G and M codes, and JSON responses. Easy.