RepRapFirmware 2.04 released

dc42

Finally, RRF 2.04 is released at https://github.com/dc42/RepRapFirmware/releases/tag/2.04. I intend this to be the last release in the RepRapFirmware 2 series, because development has now moved to RRF 3.

There have been only minor changes since the 2.04RC4 release, of which the most significant one is fixing a bug that caused file uploads over HTTP to fail sometimes because of spurious mismatched CRC messages.

Please note, I do not test the firmware builds for Duet06/085 or RADDS electronics. So use these with even greater care than usual.

fcwilt

@dc42

Thanks.

Will you be fixing problems that may be found in the release?

Frederick

dc42

@fcwilt said in RepRapFirmware 2.04 released:

@dc42

Thanks.

Will you be fixing problems that may be found in the release?

Frederick

Maybe, depending on how serious they are and when RRF3 is ready for general release.

fcwilt

@dc42 said in RepRapFirmware 2.04 released:

Maybe, depending on how serious they are and when RRF3 is ready for general release.

Based on your progress to date with RRF3 do you have a rough idea (very rough) of when RC1 will be ready?

Thanks.

Frederick

dc42

@fcwilt said in RepRapFirmware 2.04 released:

@dc42 said in RepRapFirmware 2.04 released:

Maybe, depending on how serious they are and when RRF3 is ready for general release.

Based on your progress to date with RRF3 do you have a rough idea (very rough) of when RC1 will be ready?

Thanks.

Frederick

Maybe around Christmas, maybe January.

chas2706

@dc42 said in RepRapFirmware 2.04 released:

@fcwilt said in RepRapFirmware 2.04 released:

@dc42

Thanks.

Will you be fixing problems that may be found in the release?

Frederick

Maybe, depending on how serious they are and when RRF3 is ready for general release.

I just hope that when the time arrives that RRF2 users have no other choice other than to upgrade to RRF3 that the upgrade documentation is upgraded as well to a standard where your ordinary joe blogs can understand it.

Veti

@chas2706 said in RepRapFirmware 2.04 released:

I just hope that when the time arrives that RRF2 users have no other choice other than to upgrade to RRF3 that the upgrade documentation is upgraded as well to a standard where your ordinary joe blogs can understand it.

its not that much different. you just have to specify which pins to use for endstops etc.

the configurator can now generate rrf3 configs
https://configtool.reprapfirmware.org/Start

chas2706

@Veti Ok thanks I will take a look for future reference.

dc42

We are in the process of updating all the documentation to cover RRF3.

chas2706

@dc42 said in RepRapFirmware 2.04 released:

We are in the process of updating all the documentation to cover RRF3.

Great, Thanks.