@Phaedrux
Hi! I think you mean this page... it looks like this.
The Piezo pin is wired to zprobe.in on the duet (not zprobe Mod). When tapping the Piezo the Paneldue screen toggles bettween 1000 and I think 0 so I think the board gets the Signal correct. Only the config won´t get it...
duetboard.jpg

@dc42 Thanks for the feedback

Yes, M8 lead screws are being used for the axes, and the machine is planned for CNC purposes.

Heregoes the M558 command
; Z-Probe
M558 P5 C"!io8.in" H30 F300 T6000 ; enable Z probe sensor endstop io8.in (Main Board) set dive height, probe speed and travel speed
G31 X0 Y0 Z15.0 ; set or report current probe status
M557 X0:550 Y70:460 S100 ; define mesh grid

@chrishamm Love it!

Two things I'd like to be improved:

The configurator looks a bit cluttered and dense, I think it would be more readable with more whitespace between the individual sections

Currently it's not possible to set mixxing ratios for a tool with more than one extruder

I think I've set every error in the configuration. Therefore I want to say thanks for your help. Very appreciated.

Now remain only another problem to set on my Chiron but I think it is no more about the configuration tool. So I will discuss it in another chat. See you soon.

@Andrew_15 or use the new beta config tool
https://configtool.reprapfirmware.org/next/

@genialePrutser i've done it for you

@Zbysss the reason is that G32 runs bed.g but your bed.g contains a G32 command! So the file is infinitely recursive.

Remove the G32 line from bed.g.

@St-Taw @chrishamm I managed to replicate this error. Setting the Z Probe to BLTouch on the Endstops page causes it! If you change it back to any other Z Probe, H3 appears. I guess BLTouch defaults to H3/PWM1, so hides it as an option on the tools page? Even though it's not sharing a heater with the PWM output set on the I/O Mapping page.

Ian

@Phaedrux Hi there, I have resolved the issue, the printer is 1mx1mx1m, we make custom car parts. Unfortunetly technical support for the printer is not available . I had to heat up the beds initially and run the Macros to clear faults, then ran both simultaneously.

@dc42 Thanks. Yes, I agree a negative C value is unusual, however when measuring my bed temperature I do find that the best fit Steinhart-Hart figures have a (small) -ve C value.

I speculate that this is due to more than just the characteristic of the thermistor - on my printer the heating element is on the top of the bed structure, the thermistor is on the bottom (Prusa i3 printbed), the printbed is PCB board so not terrifically high thermal conductance - I can believe the bottom of the bed is a little different temperature to the top, and that the difference is itself a function of the temperature, and consequently throws the bed response a little off from a pure thermistor response.

@droftarts said in Accelerometer on toolboard 1.3 : positioning:

I have updated the documentation page using images from the pdf kindly supplied by @Nuramori. Unfortunately I can't upload pdfs to the wiki software, so I have left the original link in.

https://docs.duet3d.com/en/User_manual/Connecting_hardware/Sensors_Accelerometer#orientation

Ian

nice documentation update for orientation toolboard !
thanks a lot @droftarts !
little pics of my config on a RR-Vcore 500 on duet 5+mini with toolboard (Ir sensor on toolboard)
337073719_584521030285760_651337798945124974_n.jpg 336799261_753810036251893_6380632004580747668_n.jpg

I adjusted the config and the toolboard is now responding. Thanks to all😊

@jay_s_uk great..Thanks for the quick update

@Philippe71 @infiniteloop , Bonjour, après de multiples vérification effectivement il semble que c’était simplement la vis qui était desserré, j’ai Malgré tout descendu le paramètre PWM du plateau pour être sure quand même au cas où, un grand merci à tout le monde pour la réactivité de ce forum encore bravo pour le projet duet3D.

Hello, after multiple checks indeed it seems that it was simply the screw which was loosened, I nevertheless lowered the PWM parameter of the plate to be sure all the same in case, a big thank you to all the world for the responsiveness of this forum congratulations again for the duet3D project.

@rooracleaf if your extruder is running backwards, use the M569 command S parameter to reverse it. If you already have a M569 command for that driver in config.g then change S0 to S1 or vice versa in that command.

@Phaedrux thanks 😅 I deleted for rewriting better but I couldn’t. Thanks, now I try ti update the firmware and After I check it again. Regards Giuseppe

@Kevvv that's interesting. We've suspected that belts might accumulate static charge, but we've no evidence that they do; whereas we have reasonable evidence that some hot ends accumulate static charge.

@fotomas I think it's to do with the Z endstop. For some reason can't select 'Switch'.
Edit: ... and the I/O mapping page isn't showing up correctly. I think there's an incompatibility in the Fisher config template.

Ian