Topics created by Sindarius

@PrintMan that is correct their server solution is open source. You can find more information here.

https://www.obico.io/obico-cloud-vs-self-hosted.html

@sindarius
Thats nice and handy!

@blt3dp while I do not have a delta to test with I do try my best to make sure that deltas are supported just like in the G-Code Viewer.

@jay_s_uk said in Object Cancel Plugin 1.0:

@joeko which zip file are you use?
Do you not get the prompts to install the plugin?
Are you standalone or SBC?

hallo,
i use this
https://github.com/Sindarius/ObjectCancelPlugin/archive/refs/heads/main.zip
from here
https://github.com/Sindarius/ObjectCancelPlugin
i found the link in the code button

i have read your answer and have looked for an other version and found this
https://github.com/Sindarius/ObjectCancelPlugin/releases/download/1.0.0/ObjectCancelPlugin-3.3.zip
and with this i was able to install 🙂
thx for your answer

Perfect that's all I needed to know. I'll have to get some limit switches installed.

Thank you @dc42

@sindarius said in 3D GCode Viewer integrated with DWC:

I’ll need to look i believe the code currently uses the machine position and not the tool position which could be the issue.

@sindarius Did you have a chance to look into this?

I was working on someone else's E3D tool-changer today and experienced the same thing, so I wanted to check in.

DWC & Firmware Version: 3.3