Topics created by seraser

@Phaedrux my bad, now with M671 work fine so really thank you very much .

Glad you could figure it out!

@dc42 said in Beta 3 Duetwifi standalone constant reboot menu files outmemory:

Unfortunately the Duet WiFi/Ethernet doesn't really have enough RAM to support a 12864 display along with all the stepper drivers that it can support. We may provide a means in a future release to reduce the number of stepper drivers supported, to make more RAM available.

Ok, will wait this release in beta 2, thank you.

@dc42 no problem, I know you are bussy and the delay is good for me because I learn to compile the firmware with less motors active, see the final of this topic:

https://forum.duet3d.com/topic/19980/little-help-to-build-rrf3/11

Thank you very much.

@dc42 thank you

The stack overflow in that M122 report is the issue that 3.1.1 was released to fix.

@seraser said in M569 settings not work with external driver(tmc2208):

Ok, no dual extrusion for me, arggg, because I have double Z in three printers with duetwifi.

that is what the duex2 and duex5 is for.

@dc42 Thank you i will replace.