Topics created by number40fan

I did find a .18mm difference of the ball spacing on the X carriage adapter. Loosened the nut and pushed the balls away from each other and got them all measuring the same. I did notice that the studs on the balls were different when trying to install them on the effector. First thought a hole was cut wrong. First ball stud fell right in and the second was too tight.

Everything is leveling out great.

I do have wheeled carriages that are made from acrylic with acentric adjusters on the wheels. They are nice and tight to the extrusion, but I am going to go ahead and get some linear rails just to get rid of one more variable.

Despite the weeble wobble, it still calibrates decent and prints good. I should have put the level on my old effector and gave it a run around to see what it had done.

I can imagine an 8 point system that directs air at the filament depending on which way the nozzle is traveling. Always blowing air on the trailing side. If the air was cold enough, could end up needing really tiny nozzles.

I see you had issues at 150mm/s. I am good at 90, so I think I'll stick with 12 volts. Appreciate the link.

It was the Z speed in the slicer. Got it fixed.

The one you've indicated with the arrow is for the touch interface. The larger one on the right is for the LCD.

Yep, that worked. Thanks.

Sorry for wasting your time. I was back in IE when I had that java error. With Chrome, it is fine. At least I can connect now with the laptop.

This is one for chrishamm.