Topics created by ludisnet

@ludisnet

Yes. You could confirm by using the jog buttons the move the nozzle in the -x and +y directions

@ludisnet said in RRF3.0 & z-probe:

so, i reduce speed (z-probe), and work without error ....
with :
M558 P8 C"zprobe.in+zprobe.mod" H4 F500 T8000 ; R0.2 S0.02 A5

Ludis

You could increase the R parameter, to allow the effector more time to settle before probing starts.

I did the configuration in the configurator, now I have a "clean" config.g, ...... everything is fine ...with RRF3.

thank you for your help!

Ludis