Topics created by luca Massimiliano

thanks I entered the commands in stop.g now I'll check if at the end of the print they both turn off

@jay_s_uk
OK I THINK I HAVE SOLVED IT THANK YOU, I HAVEN'T FOUND ANYTHING IN THE MANUAL THAT INDICATES YOUR SUGGESTION

@luca-Massimiliano the colors for the steppers reflect the typical colors of the wires on steppers. As such, the red and black do not refer to voltage and gnd. Unfortunately the allocation of colors to stepper phases is not standardized, so you will need to check phase pairs (by measuring resistance for example) to ensure stepper wiring is correct.

@droftarts said in manual/Tuning/Tool_changing:

@stuartofmt from the 3.5 release notes https://github.com/Duet3D/RepRapFirmware/wiki/Changelog-RRF-3.x :

When RRF needs to deploy a Z probe ...

Ian

I'll take another look as soon as I get the chance. This was not the behavior in one of the 3.5 rc's - hence the workaround. I've not checked for a while - will report back as soon as I can.

@Phaedrux yes, thanks, everything is perfect, both with the modem, with the computer and with the smartphone. Thank you very much

@Phaedrux
6fb21d7a-01c9-49d5-8183-7422c85f90bb-image.png
Phaedrus THANK YOU, for answering me, sincerely I think so, now now I check, I will let you know immediately

How far off is it?

@luca-massimiliano I CANNOT MODIFY THE SLICER INDEPENDENTLY X Y Z IT IS A DELTA I CAN MODIFY DIAGONAL ROD BUT THE DIAGONAL ROD IS A MEASURED VALUE OF SURE MAYBE THERE IS A WRONG VALUE THAT I CANNOT MEASURE PRECISELY FOR EXAMPLE OF THE EFFECTOR OFS

@alankilian THANKS ALAN, I INSTALLED EVERYTHING. I TAKE THE OPPORTUNITY TO WISH YOU SERENE EASTER HOLIDAYS TO YOU AND TO ALL THE FRIENDS WHO HELPED ME. THANK YOU

@droftarts GRAZIE CARO AMICO SONO RIUSCITO

@droftarts
appena posso cambio per sicurezza heater e sonda

cartesiane JPG.JPG io ho una delta kossel piano cerchio e diverse x y dove posso modificare il dvwc per avere una rappresentazione realistica? graze