Topics created by kickjaw

@oliof

That solved it thanks

@kickjaw I'm closing this due to lack of response. Feel free to open it again if you can provide more data, using 3.4.0beta7+4 or later.

@kickjaw said in Heated bed buzzing:

M950 H0 C"bedheat" T0 ; Creates Bed Heater

Some beds buzz at the PWM frequency due to magnetostriction. You can change the PWM frequency by adding a Q parameter to that command, for example:

M950 H0 C"bedheat" T0 Q10 ; Creates Bed Heater

I should have requested the start.g as well. It's just not used very often by many people. Usually if someone is using it, they know what's in it. In this case it's a received config set which I should have looked more closely at. Uploading the full sys folder would have been my next check.