Topics created by jannisj

Simon, I found a cheap metal plate (not tooling plate) to make some real tests with my magnet system. When it's all working fine, I will contact you for a good plate from Clickmetal.

BTW, for a 300x300 bed, what thickness do you suggest? Is 5mm enough? I don't wan't to oversize it unless necessary, as it will take more time to heat up...

Thanks.

@mike said in DuetWifi clones in the wild:

And what's that solder blob on they picture the provide there? Isn't it where the fuse is supposed to be?

Likely a copy of v1.02 which doesn't have the blade fuse.

The nuts in this listing https://www.ebay.co.uk/itm/M3-M8-Steel-ball-T-Slot-Nuts-Aluminum-Accessories-For-20X20-30-40-45-Series/112320385722?hash=item1a26d112baⓂm38cKecNc9nTnsZvvf6qREg look the same as the Motedis ones. But what you really need to know is the slot width that they are designed for.

I have some Motedis nuts left over, but probably not as many as you need.

I didn't consider that as I'm running 24v. Thanks.