Posts made by HighFreq

@Phaedrux edited the title

My printer and the boat we just printed

https://share.icloud.com/photos/09e7EEn27weilqbgaxgoosi8A

https://share.icloud.com/photos/057DLPy4GgcTaA6yprF7io2dQ

https://share.icloud.com/photos/0bfTI6D5ahi_wz5AuIjQ-xsPQ

https://share.icloud.com/photos/02fqnRhlLmopcgRDvdoAaM5KA

https://share.icloud.com/photos/0d37gCl6CEe9egaUXjR7WV1KA

@t3p3tony oh ok, stupid me, it gets copied in /etc/wpa_supplicant/wpa_supplicant.conf

So i tought my board stopped connecting because of that but obviously must have some other prob.

thanks.

After few reboots wpa_supplicant.conf disapperead from /boot on raspberry pi. Any advice on how to have it stick?

@dc42 ok, great

thank you.

@dc42 Still working fine. Don't know if it could be related but the 1HCL didn't show any brake issue after we installed the probe patch on the 6XD.
1HCL are running on latest stable release.

@t3p3tony Ok, thank you anyway.

@phaedrux Ok, thanks.

@jay_s_uk I am a software guy, not really good when it comes to hardware but if someone tell me what to do i have decent soldering skills and tools.

On the official documentation it says:

Input power voltage Version 1.01 and earlier: 12V to 32V, version 1.02: 12V to 48V

@jay_s_uk Thanks we prefer sticking with Duet hardware, i was thinking about 1HCL but we would like to have more i/o like the 3HC. Since 3HC has a 48V version now maybe we can change just few components to make it work.

We have a 3HC V1.01, we bought it thinking that it could have been used at 48V but we realised the release 1.01 we have can't go higher that 32V. Is there a way to use it at 48V maybe changing a component or it is just impossible?

Is there a way to abort a command when it goes busy without having to reset the entire machine?

Sometimes i issue a command that for some reason hangs or wasn't the command i meant so i want to stop it but it seems i can't untill it is finished.

@phaedrux Grazie mille, sempre soler nelle rsosti.

@phaedrux As you wish Mr. Mod

@phaedrux to help a lazy one that doesn’t use google to translate you hide the content for all the others when using search function.

@alankilian if in the thread were i received all that help (i tried to do my best to help too) i would have written in my own language people would never find it using search in case they have a similar problem.

If you are ok with it, i am not, just different point o view.

To solve my problem weren't issued several versions, i was asked to carry out some tests wich i did and developer nailed the prob on first attempt.

@alankilian,

Scusa fammi capire devo tradurre io quello che scrive lui perchè lui non ha voglia di tradurlo per postare su un forum dove tutti parlano in inglese?

E' anche una questione di rispetto.

Se ognuno di noi che veniamo da 20 nazioni diverse scrive nel thread nella propria lingua immagina il casino che viene fuori.

Ma se a te va bene così, non c'è problema, io mi limito a saltare i post non scritti in inglese.

@thomas25 The entire forum writes in english, could show some respect to all users that do not speak your language and write in english like everybody else if you really want some help. French grandeur i guess.

Is it possible to add an offset on z axis based on extruder temperature?

My ellet extruder changes lenght based on the printing temperature, how could i authomatcally add an offset based on temp of the extruder noozle?

If a mod could change title to SOLVED would be greatly ppreciated.