@gabbie said in Stepsticks on Duet3 6xd.:
Going back to stepsticks, TMC5160, on the 6XD. Would a 74HC04 hex inverter serve to invert the Step line? and then the Enable polarity, selected via the jumper, would be bridged to GND being in the "right" position (The TMC5160 DRV_ENN is active low). Then all lines are pulled up with 10k resistors.
Yes, a 74HC04 can be used to invert the Step line. Make sure that you feed 5V to VIO on the TMC5160, and don't forget to add the necessary electrolytic capacitor between VIN and GND on the TMC5160.
