@oliof Ok,thanks. Now is clear.....

Hello how should interpret this? What frequency?

@chrishamm https://1drv.ms/u/s!AplCFrF2DU0lh65DthnWsLuKB8b10w?e=oE297V

@chrishamm I can't upload the gcode,too big...

@chrishamm

@chrishamm

@chrishamm Updated the DWC no print stats. On 5i display all ok.

PollConnector.js:105 Failed to parse response:
{"fileName":"0:/gcodes/V350_z_drive_main_b_x2.gcode","offset":6680585,"data":"9G0 F6000 X200.839 Y151.582G1 F4800 X204.532 Y147.889 E0.16676G0 F6000 X203.966 Y147.889G1 F4800 X200.839 Y151.016 E0.1412G0 F6000 X200.839 Y150.451G1 F4800 X203.4 Y147.889 E0.11567G0 F6000 X202.834 Y147.889G1 F4800 X200.839 Y149.885 E0.09011G0 F6000 X200.839 Y149.319G1 F4800 X202.269 Y147.889 E0.06457G0 F6000 X201.703 Y147.889G1 F4800 X200.839 Y148.754 E0.03904G0 F6000 X200.839 Y148.188G1 F4800 X201.137 Y147.889 E0.01348G0 F6000 X201.137 Y147.11TIME_ELAPSED:8411.749681G1 F2100 E-0.8M140 S0M82 ;absolute extrusion modeG91 ;relative positioningG1 Z5 F500; move nozzle relative to positionG90 ;absolute positioningG1 X5 Y340M104 S0M140 S0G92 E0M109 S50M83 ;relative extrusion modeM104 S0End of GcodeSETTING_3 {"global_quality": "[general]\nversion = 4\nname = Fast #2\ndefiniSETTING_3 tion = voron2_350\n\n[metadata]\ntype = quality_changes\nquality_SETTING_3 type = fast\nsetting_version = 19\n\n[values]\nadhesion_type = brSETTING_3 im\nadhesion_z_offset = -0.1\nmaterial_bed_temperature = 85\nspeedSETTING_3 _slowdown_layers = 1\n\n", "extruder_quality": ["[general]\nversioSETTING_3 n = 4\nname = Fast #2\ndefinition = voron2_350\n\n[metadata]\ntySETTING_3 pe = quality_changes\nquality_type = fast\nsetting_version = 19\npSETTING_3 osition = 0\n\n[values]\nbottom_layers = 3\ncool_fan_enabled = FaSETTING_3 lse\nfill_perimeter_gaps = everywhere\ninfill_pattern = grid\ninfiSETTING_3 ll_sparse_density = 35\nline_width = 0.4\nmaterial_flow = 96\nmateSETTING_3 rial_flow_layer_0 = 98\nmaterial_print_temperature = 250\nretractioSETTING_3 n_amount = 0.8\nretraction_hop = 0.5\nretraction_speed = 35\nspeedSETTING_3 _layer_0 = 40\nspeed_print = 80\nspeed_roofing = 80\nspeed_topbottSETTING_3 om = 80\nspeed_travel = 100\nspeed_travel_layer_0 = 100\nspeed_walSETTING_3 l = 80\nspeed_wall_0 = 80\nspeed_wall_x = 80\nsupport_angle = 80\SETTING_3 nsupport_infill_rate = 30\nsupport_pattern = grid\nsupport_use_toweSETTING_3 rs = False\nsupport_xy_distance = 1\nwall_line_count = 4\n\n"]}","next":0,"err":1}

q.onload @ PollConnector.js:105
load (async)
(anonymous) @ PollConnector.js:94
request @ PollConnector.js:93
_callee15$ @ PollConnector.js:781
tryCatch @ runtime.js:63
invoke @ runtime.js:294
(anonymous) @ runtime.js:119
asyncGeneratorStep @ asyncToGenerator.js:3
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
PollConnector.js:793 SyntaxError: Unexpected token g in JSON at position 792
at JSON.parse (<anonymous>)
at XMLHttpRequest.q.onload (PollConnector.js:102:22)
_callee15$ @ PollConnector.js:793
tryCatch @ runtime.js:63
invoke @ runtime.js:294
(anonymous) @ runtime.js:119
asyncGeneratorStep @ asyncToGenerator.js:3
_throw @ asyncToGenerator.js:29
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25
Promise.then (async)
asyncGeneratorStep @ asyncToGenerator.js:13
_next @ asyncToGenerator.js:25

@chrishamm

@dc42 I'm in standalone and yes i use M80 and M81 with on/off module

@phaedrux Hello cache cleaning and tried other browser. Same thing,DWC 3.4RC1 i'ts very slow and not show the print stats,only if i made F5 page refresh.My browser is Chrome.....

@phaedrux Duet 3 Mini 5+ Standalone

@phaedrux yes DWC 3.4 RC1 but not work. I'ts very slow and freeze after few moments.....back to beta 7

I made update from 3.4 beta 6 to 3.4RC1 and DWC not show the print progress. Need F5 refresh page to show the progress or printer stats. On the 5i screen with 3.4 pre1 seems all ok.

With DWC 3.4 beta 7 works......

In this way?

[stepper_x]
#driver6 X in MOTOR B
step_pin: PC18
dir_pin: !PA27
enable_pin: !PC28
microsteps: 16
rotation_distance: 40
endstop_pin: ^PC31
position_endstop: 0
position_max: 450

[tmc2209 stepper_x]
uart_pin: PA1
tx_pin: PA0
select_pins: !PD0
uart_address: 2
run_current: 1
sense_resistor: 0.076

Hello,i flashed my duet 3 mini,for a Voron 2.4,but klipper not recognized uart adress for the driver 5 and 6 with !1 and !2 Work only first 3 driver uart_pin 1...2..and 3. Other drivers with !1 not recognized.

Pins for reference:

Driver Step Pins - 0:PC26, 1:PC25, 2:PC24, 3:PC19, 4:PC16, 5:PC30, 6:PC18

Driver Dir pins - 0:PB3, 1:PB29, 2:PB28, 3:PD20, 4:PD21, 5:PB0, 6:PA27

Driver Enable - !PC28

Uart addresses - 0:0 1:1 2:2 3:3 4:!0 5:!1 6:!2 | "!" is for inverted select pin

Thermistor Pins - T0:PC0, T1:PC1, T2:PC2

Vssa Sense:PB4 | Vref Sense:PB5

Current Sense resistor for drivers - .076ohm

SPI lines:{PD11, PC7} -> Shared SerCom#7, SPIMosi:PC12, SPIMiso:PC15, SPISCLK:PC13

Vin Monitor:PC3, uses 11:1 voltage divider

LED's - Diag:PA31, Act:PA30

12864 LCD - LCDCSPIN:PC6, ENCA:PC11, ENCB:PD1, ENCSW:PB9, LCD A0:PA2, LCDBeep:PA9, LCD Neopixel Out:PB12 (shared with IO3.out)

Neopixel Out - PA8

Serial0 - TX:PB25, RX:PB24 (USB)

Serial1 - TX:PB31, RX:PB30

SBC SPISS pin:PA6, SBCTfrReady:PA3, SerComPins:{PA4, PA5, PA6, PA7}

CAN Pins - TX:PB14 RX:PB15

Heaters, Fan outputs - {Out0:PB17 Out1:PC10 Out2:PB13 Out3:PB11 Out4:PA11, Out5:PB2, Out6:PB1} | Out6 is shared with VFD_Out

GPIO_out - {IO1:PB31 IO2:PD9 IO3:PB12 IO4:PD10} IO4 is shared with PSON

GPIO_in - {IO1:PB30 IO2:PD8 IO3:PB7 IO4:PC5 IO5:PC4 IO6:PC31}

Driver Diag - {D0:PA10, D1:PB8, D2:PA22, D3:PA23, D4:PC21, D5:PB10, D6:PA27}

Mux Pin - PD0

EXP headers only support 12864 LCD's

@mfs12 Yes solved. Thanks

@phaedrux I solved it by moving the Duet away from the power supply. It was an EMI problem, I think ....

@dc42 said in InputShaping plugin shows only zeros for frequencies:

MMSD4148G

Ok, is a 1n4148 diode,i have i, even in smd case. Thanks.

@dc42

This is my board. No diode. What type of diode need to soldering? I have 4 tool board in my lab. one is 1.2 version others 1.1 but all with diode mounted.