@jay_s_uk Thank you very much

@flopes or pwm?

@jay_s_uk Thanks
What about producing a 0-10V output, specified at tool definition?

I am making a small lathe and using a stepper motor as spindle. I am using the Duet2 wifi running Duet Web 3.4.6.
How can I control the rpm of the motor in such a way it stays spinning until commanded to stop?

Thanks

@jay_s_uk Should I put M203i only?

@jay_s_uk I set M203I0,
my limit is 0.5mm/min and not 0.5mm/s

Hi
I have a laser cutter and need to run about 0.1mm/min for some micromachining operation.
I have a Duet2-Wifi on Beta 3.5.0
I have set the minimum axis speed to 0
When trying to go slower, even reducing the speed on %cutting speed, it does not go slower. I have been cheating, changing the axis scale, but I would prefere not doing that, because it messes the other production jobs.
Any suggestions?
Thanks

Do you suggest a BLDC &encoder driver for me to build a large laser cutter?
The motor should spin at about 100Hz and 1k ticks encoder
It seems the ODrive is not an option, according to some postings here
Thanks

@ELAD . Is it working properly? I am designing a laser cutter with the ODRIVEs. Please let me know

@flopes do you have a nice way to attach an analog joystick to the duet 3d?

@Phaedrux Solved. Thanks