Topics created by cheeseandham

@droftarts said in Bug:Object model discrepancies:

wondered if you were still running a mirror of the old RRP instructions!

Adrian did eventually host a copy on RepRapLtd, so my mirror was not so important (Although photos do not "expand" on his copy) The domain expired, although the website is still "live" on my hosting, but I was thinking the other day whether to buy the domain again (it's a uk domain so pretty cheap)

@droftarts said in Bug:Object model discrepancies:

try using userPosition rather than machinePosition.

I didn't notice that object, and that's fixed the problem.
Apologies for reporting as a "bug" prematurely. I'll be more careful about that in future! 😊
I guess I just need to scale my M208 to compensate for axis scaling, and everything is fine.
Solved!

Great news. Thanks dc42!

@cheeseandham Don't be hard on yourself - we all make mistakes. ("To err is human" - Alexander Pope).

Glad your problem is solved.

David,

Thank you for your advice!

I double checked the power, re-seated everything again and examined and re-seated the ribbon cable.

When I turned back on it worked, so it was definitely one of these things. Apologies for not testing individually 🙂 Solved!

Are you sure it's not reporting the same error on driver 9 too?

It didn't report driver 9 , as you can see in the original screenshots - possibly because my config.g doesn't reference it?)

@cheeseandham That is true, the old bed point compensation is deprecated and it should be replaced by the new mesh bed compensation. Nevertheless the config tool can still generate n-point bed.g macros but to do so you have to select an older firmware version.

I'll add support for multiple independent Z motors soon.