I'm just wondering if I'm able to connect the Duet 3 6HC to 24v and have 2xDuet 3 3HC running 48v for steppers, I already own the Duet 3 so I think this is the cheapest route to 48v steppers.

Thanks for any help.

Re: 3.5.0rc1: Input shaping causes layer shifts!?

I've had layer shifts related to input shaper(M122 output had numerous input shaping failed errors, turning off IS fixed the issue) and I have been waiting for a new release candidate so I can use input shaping; however I can't see anything in the rc2 changelog to suggest this issue specifically has been fixed. Is there any value in updating to rc2 and potentially ruining a print or is it clear that it's not yet been addressed? Should I just go back to 3.4.6 and try input shaping on the stable release?

I don't want to waste filament trying to reproduce the issue to get the M122 output that's necessary to make my own bug report, at least not without some more info so I can try something new to fix the layer shifts.

@jumpedwithbothfeet Thanks for the reply, I'll add 2 on to the long list of parts I need to order. Thanks again.

I'm just wondering if I'm able to connect the Duet 3 6HC to 24v and have 2xDuet 3 3HC running 48v for steppers, I already own the Duet 3 so I think this is the cheapest route to 48v steppers.

Thanks for any help.