@dc42 I'm trying to load the results of M997 S1 and the subsequent M552's, but it blocking me as spam by Askimet.com
Best posts made by 3dpnut
-
RE: Duet 2 wifi not connecting to Paneldue 7i
-
RE: Duet 2 wifi not connecting to Paneldue 7i
@Phaedrux This is what I'm getting:
M552
WiFi module is being started
ok
M552 s1
Turn off the current WiFi mode before selecting a new one
ok
M552 S0
ok
M552 S1
Turn off the current WiFi mode before selecting a new one
ok
M552 S0
ok
M552
WiFi module is being started
ok
M552 S1
Turn off the current WiFi mode before selecting a new one
ok
Latest posts made by 3dpnut
-
RE: Duet 2 wifi not connecting to Paneldue 7i
@Phaedrux Sorry, its a setting in YAT. It is connected now, fingers crossed it stays that way!
-
RE: Duet 2 wifi not connecting to Paneldue 7i
@Phaedrux I don't know what they are. I changed my terminal type from binary to text, and it's connected now. Previously I had to change it the other way for it to work...not sure what the correct setting is for that.
-
RE: Duet 2 wifi not connecting to Paneldue 7i
Sends back:
6Dh 35h 38h 37h
-
RE: Duet 2 wifi not connecting to Paneldue 7i
I turned the machine on today, and it seems like I turned back the clock 2 weeks. The same thing is happening, not connecting to Wifi. I've run through the same cycles which fixed it last time, no luck. I ran M997 S1, and it re-installed the firmware fine. Then ran M552 S0, OK. Then M552 S1, OK. Then M587 S"xx" P"xx", and it says OK, then times out and says wifi module is idle. My computer is connected to the same network and is connected no problem. I double-checked the password and it's correct.
What am I doing wrong?
-
RE: Duet 2 wifi not connecting to Paneldue 7i
Thanks all!! Everything is now working with the exception of a Z homing issue, which I think I can (hopefully :)) figure out. Have a great weekend!
-
RE: Duet 2 wifi not connecting to Paneldue 7i
@dc42 I'll try again:
This is what I get after successfully running M997 S1:
95% complete
Upload successful
ok
M552 s1
ok
WiFi module started
WiFi reported error: no known networks found
WiFi module is idle
WiFi reported error: no known networks found
WiFi module is idle
WiFi reported error: no known networks found
WiFi module is idle
WiFi reported error: no known networks found
WiFi module is idle
M552 s0
ok
WiFi reported error: no known networks found
WiFi module is idle
M552 S1
ok
WiFi reported error: no known networks found
WiFi module is idle
WiFi reported error: no known networks found
WiFi module is idle
WiFi reported error: no known networks found
WiFi module is idle -
RE: Duet 2 wifi not connecting to Paneldue 7i
@dc42 I'm trying to load the results of M997 S1 and the subsequent M552's, but it blocking me as spam by Askimet.com
-
RE: Duet 2 wifi not connecting to Paneldue 7i
@dc42 Thank you! I made the change and now it's speaking to the Paneldue. Still no luck with the wifi tho
-
RE: Duet 2 wifi not connecting to Paneldue 7i
@Phaedrux This is what I'm getting:
M552
WiFi module is being started
ok
M552 s1
Turn off the current WiFi mode before selecting a new one
ok
M552 S0
ok
M552 S1
Turn off the current WiFi mode before selecting a new one
ok
M552 S0
ok
M552
WiFi module is being started
ok
M552 S1
Turn off the current WiFi mode before selecting a new one
ok -
RE: Duet 2 wifi not connecting to Paneldue 7i
The MCU temp should read close to room temp, which is 69 deg F, any ideas why this reading? Also, I'm feeding in 24v (which I've checked and is correct), so no idea why it's reading 16v.