Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Solved Duet 2 wifi not connecting to Paneldue 7i

    Duet Hardware and wiring
    4
    23
    792
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • 3dpnutundefined
      3dpnut @dc42
      last edited by

      @dc42 I'll try again:

      This is what I get after successfully running M997 S1:

      95% complete
      Upload successful
      ok
      M552 s1
      ok
      WiFi module started
      WiFi reported error: no known networks found
      WiFi module is idle
      WiFi reported error: no known networks found
      WiFi module is idle
      WiFi reported error: no known networks found
      WiFi module is idle
      WiFi reported error: no known networks found
      WiFi module is idle
      M552 s0
      ok
      WiFi reported error: no known networks found
      WiFi module is idle
      M552 S1
      ok
      WiFi reported error: no known networks found
      WiFi module is idle
      WiFi reported error: no known networks found
      WiFi module is idle
      WiFi reported error: no known networks found
      WiFi module is idle

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        Ok, the no networks found means that you now need to give it a SSID and password for your wifi network using the M587 command.

        https://duet3d.dozuki.com/Wiki/Gcode?revisionid=HEAD#Section_M587_Add_WiFi_host_network_to_remembered_list_or_list_remembered_networks

        You should now be able to complete the getting connected guide

        https://duet3d.dozuki.com/Guide/1.)+Getting+Connected+to+your+Duet/7#s9

        Z-Bot CoreXY Build | Thingiverse Profile

        1 Reply Last reply Reply Quote 0
        • 3dpnutundefined
          3dpnut
          last edited by

          Thanks all!! Everything is now working with the exception of a Z homing issue, which I think I can (hopefully :)) figure out. Have a great weekend!

          1 Reply Last reply Reply Quote 0
          • 3dpnutundefined
            3dpnut
            last edited by

            I turned the machine on today, and it seems like I turned back the clock 2 weeks. The same thing is happening, not connecting to Wifi. I've run through the same cycles which fixed it last time, no luck. I ran M997 S1, and it re-installed the firmware fine. Then ran M552 S0, OK. Then M552 S1, OK. Then M587 S"xx" P"xx", and it says OK, then times out and says wifi module is idle. My computer is connected to the same network and is connected no problem. I double-checked the password and it's correct.

            What am I doing wrong?

            1 Reply Last reply Reply Quote 0
            • Phaedruxundefined
              Phaedrux Moderator
              last edited by

              If you send M587 by itself does it list back your network details?

              Z-Bot CoreXY Build | Thingiverse Profile

              1 Reply Last reply Reply Quote 0
              • 3dpnutundefined
                3dpnut
                last edited by

                Sends back:

                6Dh 35h 38h 37h

                1 Reply Last reply Reply Quote 0
                • Phaedruxundefined
                  Phaedrux Moderator
                  last edited by

                  Are those SSIDs?

                  Z-Bot CoreXY Build | Thingiverse Profile

                  3dpnutundefined 1 Reply Last reply Reply Quote 0
                  • 3dpnutundefined
                    3dpnut @Phaedrux
                    last edited by

                    @Phaedrux I don't know what they are. I changed my terminal type from binary to text, and it's connected now. Previously I had to change it the other way for it to work...not sure what the correct setting is for that.

                    1 Reply Last reply Reply Quote 0
                    • Phaedruxundefined
                      Phaedrux Moderator
                      last edited by

                      I'm not sure what you're talking about, but it sounds like it's working now?

                      Z-Bot CoreXY Build | Thingiverse Profile

                      3dpnutundefined 1 Reply Last reply Reply Quote 0
                      • 3dpnutundefined
                        3dpnut @Phaedrux
                        last edited by

                        @Phaedrux Sorry, its a setting in YAT. It is connected now, fingers crossed it stays that way!

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post
                        Unless otherwise noted, all forum content is licensed under CC-BY-SA